...-geometric models can significantly increase computation time. Therefore, it is recommended to use (if computational resources allow) only one, full macro-geometric model that accounts for the electrical anisotropy of fascicles. Originality/value Development and comparison of modeling approaches...

...Krzysztof Chwastek; Mariusz Najgebauer; Branko Koprivica; Marko Rosić Purpose This paper strives at getting deeper insight into possible methods to take anisotropy of magnetic properties of non-oriented steels into account. The first considered approach is derived from considerations from...

.... Banda Kane can be contacted at: banda.kane@univ-nantes.fr 11 03 2024 20 05 2024 03 07 2024 05 07 2024 © Emerald Publishing Limited 2024 Emerald Publishing Limited Licensed re-use rights only Anisotropy Electrical characterization Electrical percolation...

...) are capable of incorporating a wide variety of material properties, such as anisotropy (Werner and Cary, 2007), dispersion (Young, 1995 ; Weedon and Rappaport, 1997 ; Teixeira et al., 1998 ; Ramadan, 2017 ; Choi et al., 2019), chirality (Bouzianas et al., 2009) and nonlinearity...

.... The mode of the bonded stator with pure shear deformation at 3781 Hz is also present in the welded stator, but at a significantly lower frequency 424 Hz, which indicates lower shear stiffness. Figure 2. Measured modeshapes Anisotropy Homogenization method Electrical machine Lamination...

... shows the effect of substrate thickness d and the relative permittivity on the bandwidth. It is seen that the bandwidth increases monotonically with increasing the d, decreases with increasing the relative permittivity. © Emerald Group Publishing Limited 2014 Computer simulation Anisotropy...

... necessary to obtain the numerical results. Findings – The resonant frequency results obtained from the neural model are in very good agreement with the experimental and theoretical results available in the literature. Finally, numerical results for the substrate anisotropy effect on the resonant...

... and anisotropies in two directions. An additional saving in runtime and Newton iterations can be achieved by solving the nonlinear problem initially on the lowest order basis functions only and projecting the solution to the complete space as starting value, analogous to a full multigrid scheme. Originality...

...Alain Bossavit We argue that, in static situations (magnetostatics, for instance) all materials can be considered as locally isotropic, though not homogeneous. Genuine anisotropy appears only in dynamic situations, e.g., in wave propagation problems. In standard notation (and letting boundary...