..., is shown in Figure 1 . Mohammed Messadi can be contacted at: messadi_m@yahoo.fr 04 12 2024 15 02 2025 21 03 2025 © Emerald Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only Induction heating Planar heater Magneto-thermal model...

... and this paper aims to study the use of these algorithms in induction heating for injection molding. Design/methodology/approach In this paper, TO is used to reduce the volume of ferrite in an injection molding tool while aiming at maximizing the performance of the device. Characteristics of the proposed...

... conducted to understand the relationship between the equivalent impedance of an induction load and the excitation current level. Practical implications This work is performed to achieve a better understanding of the fundamentals involved in the electromagnetic modeling of an induction heating system...

...José Ortega; Óscar Lahuerta; Claudio Carretero; Juan Pablo Martínez; Jesús Acero Purpose This paper aims to apply the non-linear impedance boundary condition (IBC) for a linear piecewise B–H curve in frequency domain simulations to find the equivalent impedance of a simple induction heating system...

... in the literature requires a halt in the power transfer to ensuring safe operation. The proposed method uses a complementary short-voltage pulse to excite the induction heating (IH) coil without stopping the power transfer to the remaining IH loads. With the current through the coil and the analytical equations...

...Ignacio Jesús Álvarez Gariburo; Hector Sarnago; Oscar Lucia Purpose Induction heating processes need to adapt to complex geometries or variable processes that require a high degree of flexibility in the induction heating setup. This is usually done using complex inductors or adaptable resonant...

...Feng Zhou; Zixuan Wang; Yuxiang Zhao Purpose The purpose of this paper is to study the pipe-type electromagnetic induction heating device under power frequency condition. Design/methodology/approach To reduce eddy current loss and improve heating efficiency, the structure of a pipe-type power...

..., the magnetization distribution is obtained by expanding it into a double Fourier series along x- and y-directions (Figure 3) as follows: Induction heating Eddy currents Permanent magnets Three-dimensional Extremity effects Method of images Linear motion Induction heating...

...Ammar Abdi; Youcef Ouazir; Georges Barakat; Yacine Amara Purpose This paper aims to develop a new quasi-three dimensional (3D) analytical model devoted to the study of nonlinear transient magneto-thermal coupled problems in permanent magnet (PM) transverse flux induction heating device (TFIHD...

... at: remi.bourrou@grenoble-inp.fr Induction heating Multiphysics Numerical analysis Magnetohydrodynamics In the context of nuclear waste treatment, Andra, the CEA and the Orano Company are currently developing a process where metallic and dielectric radioactive wastes are treated simultaneously...

... the possibility to achieve a reasonable design of the inductor when dealing with many design variables. Design/methodology/approach Genetic optimization algorithms are used for this purpose, demonstrating the applicability of these techniques to the design of induction heating inductors. Genetic algorithms...

... that are struggling with thermal fatigue are interested in approaches that prolong the coil lifetime. Induction heating Finite element method Design optimization methodology Induction hardening of rotationally symmetrical workpieces is usually carried out by water-cooled ring coils that are heating...

... on the model. Originality/value A novel methodology of induction heating of titanium alloy Ti6Al4V in the form of cylindrical billets is presented that simplifies the process and improves temperature uniformity along the radius and length of the billet by optimizing the shape of the inductor and selecting...

... 05 06 2019 13 11 2019 13 11 2019 Induction heating Multiphysics Computer-aided design Finite element method Diffusion process Computational electromagnetics The problem is to predict the distribution of material properties in a specific steel, in the form of a 400 mm...

... Kriging Induction heating Finite element method Model order reduction Induction brazing of aluminum parts is a widely used, fast and energy-efficient assembly process in mass manufacturing (Rudnev et al., 2017). This process needs a specially designed inductor and a precise temperature...

... is heated to the target. Martin Schulze can be contacted at: schulze@etp.uni-hannover.de 31 05 2019 20 11 2019 20 11 2019 © Emerald Publishing Limited 2019 Emerald Publishing Limited Licensed re-use rights only Induction heating Conduction heating Forging billet...

... evolutionary algorithm (AMALGAM*). The comparison concerns numerical tests and an optimal control task in induction heating. Design/methodology/approach In particular, the algorithm makes use of surrogates (meta-models) to concentrate the field evaluations at the most promising areas of the design space...

... 11 2019 © Emerald Publishing Limited 2019 Emerald Publishing Limited Licensed re-use rights only Magnetic levitation Induction heating Time-domain modelling Magnetohydrodynamics Titanium alloys are increasingly used in aerospace and automotive applications. New melting...

... algorithm and alternance method of optimal control theory are discussed and compared. Findings The test practical problems of multi-criteria optimization of induction heating processes with respect to chosen quality criteria confirm the effectiveness of application of considered MOO approaches both...

...Vladimir Bukanin; Aleksandr Ivanov; Alexei Zenkov Purpose The purpose of this paper is obtaining the optimal parameters of induction heating and melting systems by use of the new programs ELectro-Thermal Analysis (ELTA) 8.0 and Induction Crucible Furnace (ICF) to improve a quality of final...