Article navigation
Volume 5, Issue 2
1 February 1988
Engineering Computations Cover Image for Volume 5, Issue 2
Review Article| February 01 1988

Simulation of hot flat rolling of steel by the finite element method

;
;
;
Publisher: Emerald Publishing
Online ISSN: 1758-7077
Print ISSN: 0264-4401
© MCB UP Limited
1988
Engineering Computations (1988) 5 (2): 151–157.
https://doi.org/10.1108/eb023733

This paper presents a finite element simulation of the hot fiat rolling of steel. An elastoplastic behaviour of steel and plane strain are assumed. The results presented here were calculated with the finite element program MARC and they have shown good agreement with experimental data.

This content is only available via PDF.
© MCB UP Limited
1988
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
154 Views
2 Crossref

New and popular articles

Vibrational characteristics of stepped sandwich cylindrical structures with auxetic honeycomb cores
Improved fixed point iterative for solving absolute value equations
Artificial neural network-based approach for structural health monitoring of earthquake-affected industrial structures
Mechanical responses, failure behaviours and stability of soft–hard interbedded antidip slopes under various degrees of anisotropy

Suggested Reading

Applicability of the FSEM for analyzing wire flat rolling process
Engineering Computations (July,2006)
Numerical analysis of a hot‐strip rolling problem with Coulomb‐Siebel friction
Engineering Computations (December,1998)
Fiat and Chrysler: Gaining on Global Automakers?
Darden Business Publishing Cases (January,2017)
Schneider Trophy Reflections: Personal Opinions Formed from Observation and Some Talks with Others
Aircraft Engineering (August,1929)
Stablecoin as a hedge or a safe haven for international indices
China Finance Review International (November,2025)

Related Chapters

41. Comparison between results from flat dilatometer and self-boring pressuremeter tests
Penetration testing in the UK: Proceedings of the geotechnology conference organized by the Institution of Civil Engineers and held in Birmingham on 6–8 July 1988
CHAPTER XXV. BRIDGES—continued.
THE DESIGN OF STRUCTURES.: A Practical Treatise on The Building of Bridges, Roofs, &c.
Pipelining in rugged terrain: costs, cost drivers and routing principles
International conference on: Terrain and geohazard challenges facing onshore oil and gas pipelines: Proceedings of a three day international conference on terrain and geohazard challenges facing onshore oil and gas pipelines, organised by the Institution of Civil Engineers in association with BP Exploration and held at the Institution of Civil Engineers, London, UK, on 2 – 4 June 2004

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
CrossRef (2)
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal