Self‐designing structures: a practical approach Available to Purchase

Demonstrates the simple but effective application of a standard finite element program (PAFEC), and the associated geometric modelling code (PIGS), to the improvement of the design of an engineering component. The technique adopted involves augmenting material around zones of high stress and removing material in zones of low stress. This evolutionary procedure is related to the behaviour of bones in animals. The essentially two‐step procedure involves; finite element analysis of the preliminary component design using PAFEC; and, definition of a new geometry using PIGS, with selected stress contours giving an indication of the new shape. The technique, which proceeds iteratively, was first tested successfully on some classical academic optimisation problems. Its subsequent application to the industrial problem of a twin chamber pressurised extruded aluminium section, the primary component of an air drying system, resulted in material savings of up to 50 per cent and an associated drop in the maximum von Mises stress of 45 per cent. While this method does not determine the optimal structural form, it does generate substantial improvements in terms of material usage and reduced maximum stresses. It has the advantage that it can be used by any competent engineer with a working knowledge of the strength of materials, finite elements and structural form.