Presents a new contact detection algorithm based on double‐ended spatial sorting (DESS) that is insensitive to variations in object size. It was developed to address the problems that arise when objects with non‐spherical geometry and non‐uniform sizes are simulated using discrete element techniques. The algorithm is applicable to general spatial reasoning problems. While techniques based on spatial hashing (sometimes called bining methods) perform well for objects of similar size, they degrade significantly when the objects vary in size. The DESS algorithm overcomes this problem by using a spatial sorting technique applied to both ends of the object’s projection along each orthogonal axis. Discrete element test simulations comparing DESS and spatial hashing (NBS) are detailed. The results demonstrate that when object sizes vary significantly (size ratios greater than 8:1), DESS outperforms NBS up to around 100,000 objects. It is noted, however, that the superior scaling properties of NBS will always outperform DESS for some large numbers of objects.
Article navigation
1 February 2001
Conceptual Paper|
February 01 2001
A fast contact detection algorithm insensitive to object sizes Available to Purchase
Eric Perkins;
Eric Perkins
Intelligent Engineering System Laboratory (IESL), Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
Search for other works by this author on:
John R. Williams
John R. Williams
Intelligent Engineering System Laboratory (IESL), Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
Search for other works by this author on:
Publisher: Emerald Publishing
Online ISSN: 1758-7077
Print ISSN: 0264-4401
© MCB UP Limited
2001
Engineering Computations (2001) 18 (1-2): 48–62.
Citation
Perkins E, Williams JR (2001), "A fast contact detection algorithm insensitive to object sizes". Engineering Computations, Vol. 18 No. 1-2 pp. 48–62, doi: https://doi.org/10.1108/02644400110365770
Download citation file:
Suggested Reading
MULTIOBJECTIVE DESIGN OPTIMIZATION OF CONTINUOUS BEAMS BY NUMERICAL METHODS
Engineering Computations (May,1992)
A linear complexity intersection algorithm for discrete element simulation of arbitrary geometries
Engineering Computations (February,1995)
Shape representation and contact detection for discrete element simulations of arbitrary geometries
Engineering Computations (May,1998)
Effect of particle shape on the strength and deformation mechanisms of ellipse‐shaped granular assemblages
Engineering Computations (February,1995)
Coupled discrete and finite-element modelling of geosynthetic tubes filled with granular material
Geosynthetics International (July,2016)
Related Chapters
INFLUENCE OF PRECOMPRESSION FORCE ON STRENGTH AND DEFORMATIONS OF CONTACT BETWEEN CONCRETE AND EXTERNAL PROFILED REINFORCEMENT
Application of Codes, Design and Regulations: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 5–7 July 2005
EXPERIMENTAL STUDY OF THE WEAR OF A CONCRETE SURFACE UNDER ICE FRICTION
Challenges of Concrete Construction: Volume 3, Repair, Rejuvenation and Enhancement of Concrete: Proceedings of the International Seminar held at the University of Dundee, Scotland, UK on 5–6 September 2002
Enacting the Everyday: The Dialectic of Algorithms, Data Activism, and Platform Power
Contesting Platform Power: The Oppositional Affordances of Data Activism
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
