– The analysis of the effect of tool vibrations on the measured and simulated draught forces of cultivator tools. This paper aims to discuss this issue.
– Soil bin measurements and discrete element method (DEM)-based simulations.
– The soil-tool interaction induced free vibrations of cultivator tools have significant impact on the measured draught force, and the simulations made by using vibrating tools give similar results.
– Accurate calibration of discrete element model parameters can be done based on the reproduction of the whole Mohr-Coulomb failure line. Draught force ratio – velocity ratio values seem to be independent of tool geometry and soil conditions in case of velocity ratio higher than 2.
– DEM-based numerical simulations can be used for modeling the effect of tool vibration on the draught force values. During discrete element simulations of soil-tool interaction, the effect of tool vibration may not be neglected.
– The paper demonstrates that during the discrete element modelling of the soil-tool interaction, the tool vibration phenomenon should not be neglected.
