– The purpose of this paper is to first present the key features of hybrid numerical methods that enable cost-effective simulations of complex thermofluid systems, and then demonstrate the formulation and application of such a method.
– A hybrid numerical method is formulated for simulations of a closed-loop thermosyphon operating with slurries of a micro-encapsulated phase-change material suspended in distilled water. The slurries are modeled as homogeneous mixtures, with inputs of effective properties and overall heat-loss coefficients. Combinations of an axisymmetric two-dimensional (2D) control-volume finite-element method and a segmented-quasi-one-dimensional (1D) model are used to achieve cost-effective simulations. Proper matching of the solutions at the interfaces between adjacent axisymmetric 2D and quasi-1D zones is ensured by incorporating and heuristically determining suitable lengths of pre- and post-heating (and also pre- and post-cooling) sections.
– In the demonstration problem, which would strictly require full three-dimensional simulations of the fluid flow and heat transfer phenomena, the proposed hybrid 1D/2D numerical method produces results that are in very good agreement with those obtained in a complementary experimental investigation.
– The hybrid numerical methods discussed in this paper allow cost-effective computer simulations of complex thermofluid systems. These methods can therefore serve as very useful tools for the design, parametric studies, and optimization of such systems.
