Laminar fully developed periodic heat transfer and fluid flow characteristics in corrugated two‐dimensional ducts with constant cross‐sectional area are numerically investigated. The governing equations are solved numerically by a finite‐volume method for elliptic flows in complex geometries using colocated variables and Cartesian velocity components. The results were obtained for a uniform wall temperature for two inclination angles and three duct aspect ratios (H/L) and for Reynolds number ranging from 30 to 1200. The plot of the velocity vectors show a complex flow pattern. Unexpected high enhancement of the average Nusselt number was observed at low Reynolds number for H/L = ½ and ⅓. A moderate increase in Nusselt number was obtained as Reynolds number was increased further.
Article navigation
1 May 1992
Review Article|
May 01 1992
FULLY DEVELOPED LAMINAR FLUID FLOW AND HEAT TRANSFER IN A STREAMWISE‐PERIODIC CORRUGATED DUCT WITH CONSTANT CROSS‐SECTIONAL AREA
BIJAN FARHANIEH;
BIJAN FARHANIEH
Department of Thermo‐ and Fluid Dynamics, Chalmers University of Technology, S‐412 96 Göteborg, Sweden
Search for other works by this author on:
BENGT SUNDÉN
BENGT SUNDÉN
Department of Thermo‐ and Fluid Dynamics, Chalmers University of Technology, S‐412 96 Göteborg, Sweden
Search for other works by this author on:
Publisher: Emerald Publishing
Online ISSN: 1758-6585
Print ISSN: 0961-5539
© MCB UP Limited
1992
International Journal of Numerical Methods for Heat & Fluid Flow (1992) 2 (5): 379–390.
Citation
FARHANIEH B, SUNDÉN B (1992), "FULLY DEVELOPED LAMINAR FLUID FLOW AND HEAT TRANSFER IN A STREAMWISE‐PERIODIC CORRUGATED DUCT WITH CONSTANT CROSS‐SECTIONAL AREA". International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 2 No. 5 pp. 379–390, doi: https://doi.org/10.1108/eb017500
Download citation file:
New and popular articles
Suggested Reading
NUMERICAL INVESTIGATION OF TURBULENT FLUID FLOW AND HEAT TRANSFER CHARACTERISTICS IN A STREAMWISE‐PERIODIC CORRUGATED DUCT WITH CONSTANT CROSS‐SECTIONAL AREA
International Journal of Numerical Methods for Heat & Fluid Flow (January,1993)
3D numerical investigation of turbulent forced convection in wavy ducts with trapezoidal cross‐section
International Journal of Numerical Methods for Heat & Fluid Flow (February,1998)
Improved asymptotic expansion method for laminar fluid flow and heat transfer in conical gaps with disks rotating
International Journal of Numerical Methods for Heat & Fluid Flow (August,2023)
Analysis on sealing performance of VL seals based on mixed lubrication theory
Industrial Lubrication and Tribology (October,2018)
DERIVATION OF THIN PLATE BENDING ELEMENTS WITH ONE DEGREE OF FREEDOM PER NODE: A SIMPLE THREE NODE TRIANGLE
Engineering Computations (June,1993)
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
