The paper gives the description of boundary element method(BEM) with subdomains for the solution of convection—diffusion equations with variable coefficients and Burgers’equations. At first, the whole domain is discretized into K subdomains, in which linearization of equations by representing convective velocity by the sum of constant and variable parts is carried out. Then using fundamental solutions for convection—diffusion linear equations for each subdomain the boundary integral equation (in which the part of the convective term with the constant convective velocity is not included into the pseudo‐body force) is formulated. Only part of the convective term with the variable velocity, which is, as a rule, more than one order less than convective velocity constant part contribution, is left as the pseudo‐source. On the one hand, this does not disturb the numerical BEM—algorithm stability and, on the other hand, this leads to significant improvement in the accuracy of solution. The global matrix,similar to the case of finite element method, has block band structure whereas its width depends only on the numeration order of nodes and subdomains. It is noted, that in comparison with the direct boundary element method the number of global matrix non‐zero elements is not proportional to the square of the number of nodes, but only to the total number of nodal points. This allows us to use the BEM for the solution of problems with very fine space discretization. The proposed BEM with subdomains technique has been used for the numerical solution of one‐dimensional linear steady‐state convective—diffusion problem with variable coefficients and one‐dimensional non‐linear Burgers’ equation for which exact analytical solutions are available. It made it possible to find out the BEM correctness according to both time and space. High precision of the numerical method is noted. The good point of the BEM is the high iteration convergence,which is disturbed neither by high Reynolds numbers nor by the presence of negative velocity zones.
Article navigation
1 June 1994
Conceptual Paper|
June 01 1994
A boundary element method for the solution of convective diffusion and burgers’ equations Available to Purchase
Michael M. Grigor’ev
Michael M. Grigor’ev
Chemical Technology Institute of Kazan, K. Marx Street 68, Kazan 420015,Russia
Search for other works by this author on:
Publisher: Emerald Publishing
Online ISSN: 1758-6585
Print ISSN: 0961-5539
© MCB UP Limited
1994
International Journal of Numerical Methods for Heat & Fluid Flow (1994) 4 (6): 527–552.
Citation
Grigor’ev MM (1994), "A boundary element method for the solution of convective diffusion and burgers’ equations". International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 4 No. 6 pp. 527–552, doi: https://doi.org/10.1108/EUM0000000004112
Download citation file:
Suggested Reading
RBF interpolation of boundary values in the BEM for heat transfer problems
International Journal of Numerical Methods for Heat & Fluid Flow (August,2003)
Boundary integral formulation and mushy zone model for phase change problem
International Journal of Numerical Methods for Heat & Fluid Flow (June,2001)
Experiences in solutions of non‐linear transport equations with the Green element method
International Journal of Numerical Methods for Heat & Fluid Flow (November,2000)
A numerical study of the Burgers’ and Fisher’s equations using barycentric interpolation method
International Journal of Numerical Methods for Heat & Fluid Flow (September,2022)
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
