Computation of isothermal and reacting Flows in turbojet afterburners Available to Purchase

Computation have been made of the three‐dimensional flow field development, chemical reaction and combustion processes in a typical afterburner system under both isothermal and reacting flow conditions. The calculations are based upon a numerical solution of the time‐averaged transport equations for mass, momentum, turbulence kinetic energy,dissipation rate, enthalpy and species concentrations using a finite‐volume formulation. The physical models include the k—ε turbulence model, the eddy break‐up model, a two‐step reaction model, a droplet vaporization and combustion model and six‐flux radiation model. The mean flow structures are presented in important longitudinal and cross‐sectional planes which show certain striking similarities and contrasting differences for isothermal and reacting flows. The flame stabilizer flow is shown to be dominated by a complex combination of recirculation and vortex patterns. Combustion alters convergence and mixing flow patterns downstream of the flame stabilizer, thus influencing the selection of the fuel injection system. The predicted reacting flow parameters identify a number of design parameters such as fuel injector location, high degree reaction zone, nozzle opening area and the corresponding fuel flow rate.