...Mehmet Akif Ceviz; Faraz Afshari; Burak Muratçobanoğlu; Murat Ceylan; Eyüphan Manay Purpose The purpose of this paper is to experimentally and numerically investigate the cooling performance of the air-to-water thermoelectric cooling system under different working conditions. Design/methodology...

...; EHD = with electric field effect; max = Maximum; and ref = Reference. Heat sink Heat transfer Cooling systems Thermal management Electric field Optimization Figure 1 presents the EHD heat sink geometry as well as dimensions for the electrodes...

.../m² K) h_p= porous blocks height (m) H= channel height (m) k= thermal conductivity (W/m K) K= permeability (m^{2) l= channel length (m) N= number of blocks Heat transfer Flow Convection Cooling systems Mixed convection Porous blocks Inclined channel}...

... Publishing Limited 2012 Film cooling Louver scheme Rotating blade Leading edge Gas turbine CFD Cooling systems Turbines C= axial chord length of the rotor blade (m) d= diameter of hole at inlet (m) The work by Ahn et al. (2006) was chosen...

... line w tube wall ∞ fully developed Antonio Campo can be contacted at: acampo@emba.uvm.edu © Emerald Group Publishing Limited 2006 Optimization techniques Convection Cooling systems Electronic equipment and components c_p specific heat...

... Limited 2006 Heat conduction Water Cooling systems Finite element analysis An inverse heat conduction problem (IHCP) means that the boundary conditions (BC) or material properties are not fully specified, and that they are determined from the measured internal temperature profiles...