This study focuses on the objective evaluation of the silhouette of the front bloused line of women’s blouses, in which fusible interlinings are used in the construction of the open part. The wearing test was carried out over three seasons and the bloused lines before and after the fatigue were observed and examined in relation to the mechanical properties of fused composites and their constituent fabrics. Since bending properties and KOSHI were found to play an important role in the change of the silhouette formation of bloused lines, those of fused fabrics were studied by applying the simple model. Finally, in the sensory test, applying the blouses fatigued and not fatigued, their open parts made up of fused composite are evaluated by 71 consumers for their preference. The essential concepts involved in the consumer preference were clarified.
Article navigation
1 May 1999
Research Article|
May 01 1999
Effect of mechanical properties of fabrics on change of bloused line during cyclic wear: On front open part made up of fused composites
Michiko Kihara;
Michiko Kihara
System Aid Co. Ltd, Tokyo, Japan
Search for other works by this author on:
Machiko Murakami;
Machiko Murakami
Gifu City Women’s College, Gifu, Japan
Search for other works by this author on:
Takako Fujimoto
Takako Fujimoto
Hokkaido University of Education, Iwamizawa, Japan
Search for other works by this author on:
Publisher: Emerald Publishing
Online ISSN: 1758-5953
Print ISSN: 0955-6222
© MCB UP Limited
1999
International Journal of Clothing Science and Technology (1999) 11 (2-3): 125–138.
Citation
Kihara M, Murakami M, Fujimoto T (1999), "Effect of mechanical properties of fabrics on change of bloused line during cyclic wear: On front open part made up of fused composites". International Journal of Clothing Science and Technology, Vol. 11 No. 2-3 pp. 125–138, doi: https://doi.org/10.1108/09556229910276269
Download citation file:
New and popular articles
Suggested Reading
Evaluation of the basic low stress mechanical properties (bending, shearing and tensile)
International Journal of Clothing Science and Technology (December,2000)
APPLICATION OF A SPECIAL SEWING THREAD TO GATHERING
Research Journal of Textile and Apparel (February,2002)
Investigations of the relation between fabric mechanical properties and behaviour
International Journal of Clothing Science and Technology (June,2003)
Influence of mechanical and physical properties of fabrics on cutting process
International Journal of Clothing Science and Technology (August,1998)
A guide line for manufacturing “ideal fabrics”
International Journal of Clothing Science and Technology (May,1999)
Related Chapters
CORROSION RESISTANCE OF ALKALI ACTIVATED ALUMINOSILICATE MATERIALS
Innovations and Developments In Concrete Materials And Construction: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 9–11 September 2002
COVER TO REINFORCEMENT – GETTING IT RIGHT
Application of Codes, Design and Regulations: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 5–7 July 2005
Shear strength anisotropy of natural London Clay
Stiff Sedimentary Clays: Genesis and Engineering Behaviour: Géotechnique Symposium in Print 2007
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
