The viscoelastic properties of the sewing thread before and after loading in the sewing process were investigated. Sewing threads are subjected to dynamic tension and friction in the sewing process. In order to compare polyester, cotton and silk sewing threads, the fineness of the threads were selected to be almost equal. There are some differences between the stress extension curves of the parent thread and the sewn thread except for the polyester sewing thread. The phenomenon of inverse relaxation occurs for high levels of retraction. The stress‐inverse relaxation index for the polyester sewing thread is larger than for other threads and the inverse relaxation for silk thread is small. From the creep curves, the sewn threads show higher secondary creep and lower instantaneous recovery than the parent threads.
Article navigation
1 February 2003
Conceptual Paper|
February 01 2003
Viscoelastic properties of threads before and after sewing
Isao Ajiki;
Isao Ajiki
Faculty of Education, Yamagata University, Japan
Search for other works by this author on:
Ron Postle
Ron Postle
Department of Textile Technology, University of New South Wales, Sydney, Australia
Search for other works by this author on:
Publisher: Emerald Publishing
Online ISSN: 1758-5953
Print ISSN: 0955-6222
© MCB UP Limited
2003
International Journal of Clothing Science and Technology (2003) 15 (1): 16–27.
Citation
Ajiki I, Postle R (2003), "Viscoelastic properties of threads before and after sewing". International Journal of Clothing Science and Technology, Vol. 15 No. 1 pp. 16–27, doi: https://doi.org/10.1108/09556220310461132
Download citation file:
New and popular articles
Suggested Reading
Study of the tensile force of thread in relation to its pre‐tension
International Journal of Clothing Science and Technology (June,2001)
New heat inserter from Herfurth
Assembly Automation (December,2001)
Investigation of the Performance of Sewing Thread
International Journal of Clothing Science and Technology (May,1994)
Primerless threadlocker
Pigment & Resin Technology (August,1998)
Galling, contamination problems of threaded parts for semiconductor industry solved
Anti-Corrosion Methods and Materials (October,1999)
Related Chapters
PHYSICAL PROPERTIES OF COMPOSITES MADE FROM SECONDARY CEMENTITIOUS MATERIALS WITHREFERENCE TO THEIR SUITABILITY FOR WATER FILTERS
Application of Codes, Design and Regulations: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 5–7 July 2005
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
