The purpose of this paper is to determine the effect of flash fire exposure on the mechanical properties of single-layer thermal protective clothing.
The full-scale flame manikin tests were performed to simulate flash fire exposure. Two typical fire-resistant fabrics were investigated. The manikin was divided into seven body parts and the specimens meeting the requirements of tensile and tear strength standards were sampled. Fabric thickness, mass per unit area, tensile strength and tear strength were measured and analyzed.
The results revealed the significant influence of heat flux on both of tensile and tear strength. However, the regression analysis indicated the low R2 of the liner models. When the tensile and tear strength retention were reorganized based on the body parts, both of the multiple linear regression models for tensile and tear strength showed higher R2 than the one-variable linear regressions. Furthermore, the R2 of the multiple linear regression model for tear strength retention was remarkably higher than that of the tensile strength.
The findings suggested that greater attention should be paid to the local part of human body and more factors such as the air gap should be considered in the future thermal aging of firefighters’ clothing studies.
The outcomes provided useful information to evaluate the mechanical properties of thermal protective clothing and predict its service life.
