... 05 2026 21 05 2026 © Emerald Publishing Limited 2026 Emerald Publishing Limited Licensed re-use rights only Finite element method Cup material Shoulder strap material Underband material Breast deformation The female breast possesses limited anatomical support due...

...@sues.edu.cn 06 02 2023 13 05 2023 10 07 2023 © Emerald Publishing Limited 2023 Emerald Publishing Limited Licensed re-use rights only Finite element method Sports bra design Breasts deformation Multiple markers A non-contact three-dimensional (3D) scanner (Bok...

... non-linear dynamics. 09 10 2021 25 02 2022 17 04 2022 © Emerald Publishing Limited 2022 Emerald Publishing Limited Licensed re-use rights only Polyester hairiness Pilling Finite element method Simulating Non-linear dynamic Pilling is a classic problem...

... the finite element method (FEM). Design/methodology/approach This paper presented a simulation model of the waist cross section consisting of three parts, namely skin, soft tissue and lumbar vertebrae, respectively, according to CT scan. The finite element the model of waist cross-section was established...

... utilizes airflow in condensing equipment to condense fiber bundle and improve yarn properties. Design/methodology/approach The paper opted for an exploratory study using finite element method, the airflow field in the condensing area of CCS and FRCS were simulated. First, a periodic movement...

... socks using finite element method. Design/methodology/approach – Through 3D body scanning, a biomechanical lower leg cross-section model is constructed for simulating elastic contact between human body and top part of socks. The human body is regarded as an elastomer and the contact between lower...

... relationship between pressure and displacement on the lower leg cross-section using finite element method (FEM) and curve fitting. Design/methodology/approach – This paper presented a 2D simulation model of the lower leg cross-section consisting of three layer different mechanical properties, namely skin...

...Fatemeh Mousazadegan; Siamak Saharkhiz; Masoud Latifi Purpose The purpose of this paper is to model tension seam pucker by finite‐element method. Design/methodology/approach A linear three dimensional finite‐element analysis in ABAQUS 6.8 is used to model pucker formation under sewing thread...