... was measured using the digital image correlation (DIC) method. Subsequently, the constitutive parameters of the material between the notches were inversely identified. Findings The proposed approach of inverse identification of constitutive parameters by using notched specimens and full-field strain...

... beams, located on the area where aircraft are most likely to land, was prepared with a speckle pattern, and a camera was assembled above a column on each of the adjacent frames, enabling the computation of displacements using digital image correlation (DIC). The camera continuously acquires images...

... technique. Design/methodology/approach Compression tests are carried out under uniaxial and quasi-static loading conditions on wood specimens oriented on the radial-tangential (RT) plane, with different grain orientations. Full-field displacements and strains are measured using digital image correlation...

... of the FSW joint in tension and fatigue test were experimentally investigated by digital image correlation (DIC) technique. Findings The local stress-strain behaviors of the sub-regions show that the plastic strain always concentrated at the heat affected zone (HAZ) on the advancing side both in tension...

... The structures of elastic-plastic corner deformation field were assessed experimentally by looking at the corner border displacement and strain fields on the surface of a compact tension (CT) specimen using digital image correlation method. For assessment and verification purposes, the results were compared...

... also obtained. The measurement of displacements was made with Digital Image Correlation (DIC). Findings The results of this study show the similarity between experimental and empirical values for the studied woods species. Originality/value This original study aimed at characterizing...

... success in Experimental Mechanics and, in particular, in fracture mechanics. The purpose of this paper is to report on the comparison of the strain field from numerical modelling forecasts against the experimental data obtained with the digital image correlation method under Mode II loading in fatigue...

... during the failure of the impacted composite laminates when subjected to compression. Design/methodology/approach – A series of compression-after-impact (CAI) tests was performed on composite plates 150×100×4 mm3 made of a carbon-fibre-reinforced epoxy resin matrix. A digital image correlation...