Article navigation
Volume 25, Issue 1
1 January 1973
Industrial Lubrication and Tribology Cover Image for Volume 25, Issue 1
Review Article| January 01 1973

A NOMOGRAPH FOR DETERMINING THE MOLECULAR WEIGHTS OF LUBRICATING OILS

Publisher: Emerald Publishing
Online ISSN: 1758-5775
Print ISSN: 0036-8792
© MCB UP Limited
1973
Industrial Lubrication and Tribology (1973) 25 (1): 21–22.
https://doi.org/10.1108/eb053034

ACCORDING TO the ASTM Standard No. D‐2878–70, the approximate value of lubricating oil molecular weight may be estimated on the basis of evaporation loss under specified conditions.

This content is only available via PDF.
© MCB UP Limited
1973
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
457 Views
1 Crossref

New and popular articles

Construction of flower-like CuCo-MOF@1T-MoS2 nanocomposites as lubricant additives for enhanced tribological performance
Effect of lubricant oxidation on tribological performance of gear contact interfaces in three gorges ship lift: experiments and simulation
Influence of the biomimetic textures inspired by Monstera deliciosa on the friction and wear of rolling bearings under starved lubrication
Corrosion and wear of four-ball pair in Lop Nur brine-contaminated barge gear oil

Suggested Reading

Tribological behavior of the synthetic chlorine‐ and fluorine‐containing silicon oil as aerospace lubricant
Industrial Lubrication and Tribology (August,2008)
Sustainable lubrication: low molecular weight PTFE micro-particles as extreme pressure additives for heavy duty grease applications
Industrial Lubrication and Tribology (September,2021)
Design of low‐noise CMOS transimpedance amplifier
Microelectronics International (July,2013)
Fabrication and tribological behavior of novel UHMWPE/vitamin-C/graphene nanoplatelets based hybrid composite for joint replacement
Industrial Lubrication and Tribology (December,2021)
Influence of plasticizer molecular weight on plasticizer retention in PVC geomembranes
Geosynthetics International (March,2005)

Related Chapters

P3/1 Mechanism and a design method of soil-reinforcement of cut-off slopes with steel bars
Performance of reinforced soil structures
CFD modelling for engineering solution optimisation on the Usk Reservoir
Smart Dams and Reservoirs: Proceedings of the 20th Biennial Conference of the British Dam Society held at Swansea University from 13th–15th September 2018
14. Future paving bitumen quality requirements
Highway research: sharing the benefits

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
CrossRef (1)
This Feature Is Available To Subscribers Only

or Create an Account

Close subscription notice
Close access options