Article navigation
Volume 3, Issue 8
1 August 1951
This article was originally published in
Scientific Lubrication
Scientific Lubrication Cover Image for Volume 3, Issue 8
Review Article| August 01 1951

WIRE ROPE LUBRICATION: PART 3 Applying the Lubricant

Publisher: Emerald Publishing
Online ISSN: 2977-7224
Print ISSN: 0371-0947
© MCB UP Limited
1951
Scientific Lubrication (1951) 3 (8): 20–23.
https://doi.org/10.1108/eb053443

Part One in this series appeared in our June issue and dealt with early and more recent investigations which have proved the importance of wire rope lubrication. Part Two (July issue) covered the duties and properties of wire rope lubricants.

This content is only available via PDF.
© MCB UP Limited
1951
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
215 Views

New and popular articles

Tribological and acoustic evaluation of non-asbestos copper-free automotive brake pads with olefin elastomers
Dry tribological behaviour of polymer-based friction composites containing blast furnace slag: effect of slag content
High temperature friction and wear properties of Cr-Ni-Mo alloy steel for high-speed train brake disc
Experimental study on vibration and temperature rise characteristics of rotor-bearing system lubricated by gas–liquid two-phase fluid

Suggested Reading

WIRE ROPE LUBRICATION and CORROSION PROTECTION
Industrial Lubrication and Tribology (January,1973)
PART I EARLY WORK ⃜ RECENT INVESTIGATIONS ⃜ The IMPORTANCE OF CORRECT WIRE ROPE LUBRICATION: WIRE ROPE LUBRICATION
Scientific Lubrication (June,1951)
AN EASILY MADE WIRE ROPE LUBRICATOR
Scientific Lubrication (October,1957)
WIRE ROPE LUBRICATION: PART 2 Properties of the Lubricant
Scientific Lubrication (July,1951)
Wire rope selection for manual winch application
Journal of Engineering, Design and Technology (July,2009)

Related Chapters

A WONDERFUL AERIAL ROPEWAY IN THE ANDES.
ENGINEERING WONDERS OF THE WORLD VOLUME I.
A case study on the evaluation of the hanger rope for the Namhae Suspension Bridge
Bridge Management 5: Inspection, maintenance, assessment and repair: Proceedings of the 5th International Conference on Bridge Management, organized by the University of Surrey, 11–13 April 2005
7. Detail design aspects
Hydraulic gates and valves in Free Surface Flow and Submerged Outlets

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close subscription notice
Close access options