The decrease in availability of mineral oils and their environmental hazards created the need to search for alternate bio-based oils. The aim of this study is to investigate the friction and wear characteristics of kapok (Ceiba pentandra) oil as a bio-lubricant.
The wear and friction characteristics between steel-steel contact under lubrication were found using a pin-on-disk tribometer under different loads and sliding speeds, respectively. The corrosion and oxidation stability of the test lubricants were also analyzed. The worn surfaces of the specimen are analyzed with the help of an optical microscope. The obtained results were compared with palm oil and mineral oil (SAE20W 40).
From the investigation, it is found that the kapok oil possess a lower coefficient of friction and wear rate than palm and mineral oil. It is also found that the coefficient of friction varies proportionally and the wear rate varies inversely with the sliding speed as expected.
The present results confirm that the kapok oil can be used as an alternative lubricant to reduce the demand for mineral-based oil lubricants.
