This paper aims to address the influence of lubrication methods on operational characteristics, power losses and temperature behavior of gears and bearings. It contributes to the improvement of resource and energy efficiency of geared transmissions.
Experimental investigations were performed at a gear and bearing power loss test rig. Thereby, dip lubrication, injection lubrication with injection volumes from 0.05 to 2.00 l/min and minimum quantity (MQ) lubrication with an injection volume as little as 28 ml/h were considered. Measurements were evaluated in terms of no-load and load-dependent power loss, bulk temperatures and mean gear coefficients of friction.
Results show strongly reduced no-load gear and bearing losses for lubrication methods with low lubricant quantities. Load-dependent losses are similar to conventional lubrication methods and tend to be lower at high speed. This is related to higher bulk temperatures, as the heat dissipation of lubrication methods with low oil quantities is limited. Limited thermal load limits were shown to be extended by LowLoss gears.
Systematic investigations were conducted to evaluate the influence of dip, injection and MQ lubrication on power loss and temperature behavior of gears and bearings. The results of this study support further research on needs-based lubrication methods for gearboxes.
