Skip to Main Content
Article navigation
Volume 25, Issue 1
1 January 1973
Industrial Lubrication and Tribology Cover Image for Volume 25, Issue 1
Review Article| January 01 1973

A NOMOGRAPH FOR DETERMINING THE MOLECULAR WEIGHTS OF LUBRICATING OILS Available to Purchase

ADAM ZANKER
ADAM ZANKER
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 1758-5775
Print ISSN: 0036-8792
© MCB UP Limited
1973
Industrial Lubrication and Tribology (1973) 25 (1): 21–22.
https://doi.org/10.1108/eb053034

ACCORDING TO the ASTM Standard No. D‐2878–70, the approximate value of lubricating oil molecular weight may be estimated on the basis of evaporation loss under specified conditions.

This content is only available via PDF.
© MCB UP Limited
1973
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
453 Views
1 Crossref
View Metrics
Study on the influence of laser parameters on the tribological properties of microtextured cemented carbide
Synergistic mechanisms of ultrasonic vibration-assisted laser surface texturing on Ti-6Al-4V: microstructural evolution and tribological enhancement
Coupling biomimetic micro-textures with MoS2 solid lubricant to enhance tribological properties of Ti6Al4V
Study on the evolution of fretting and sliding worn surface under dry friction condition

Suggested Reading

Design of low‐noise CMOS transimpedance amplifier
Microelectronics International (July,2013)
Nomograph for earth acceleration calculation
Geotechnique (December,1972)
Influence of plasticizer molecular weight on plasticizer retention in PVC geomembranes
Geosynthetics International (March,2005)
Low velocity impact of Kevlar and ultra high molecular weight polyethylene (UHMWPE) reinforced epoxy composites
Multidiscipline Modeling in Materials and Structures (May,2020)
Sustainable lubrication: low molecular weight PTFE micro-particles as extreme pressure additives for heavy duty grease applications
Industrial Lubrication and Tribology (September,2021)

Related Chapters

P3/1 Mechanism and a design method of soil-reinforcement of cut-off slopes with steel bars
Performance of reinforced soil structures
CFD modelling for engineering solution optimisation on the Usk Reservoir
Smart Dams and Reservoirs: Proceedings of the 20th Biennial Conference of the British Dam Society held at Swansea University from 13th–15th September 2018
14. Future paving bitumen quality requirements
Highway research: sharing the benefits

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
CrossRef (1)
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal