Skip to Main Content
Article navigation
Volume 47, Issue 1
1 February 1995
Industrial Lubrication and Tribology Cover Image for Volume 47, Issue 1
  •  
  •  
Technical Paper| February 01 1995

Effects of changes in grease structure on sliding friction Available to Purchase

Ryszard Czarny
Ryszard Czarny
Technical University of Wroclaw, Poland
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 1758-5775
Print ISSN: 0036-8792
© MCB UP Limited
1995
Industrial Lubrication and Tribology (1995) 47 (1): 3–7.
https://doi.org/10.1108/00368799510078638

Describes the structure and rheological characteristics of soap based greases and how the thickener retains the oil phase. Illustrates the thixotropic behaviour and effect of time of shearing on friction, film thickness, noise energy loss in grease lubricated contacts. Shows how friction can be less with grease than with oil.

Keywords:
Friction, Grease, Lubrication, Noise, Oils, Rheology, Testing, Lubricant film thickness
This content is only available via PDF.
© MCB UP Limited
1995
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
245 Views
11 Crossref
View Metrics
Synergistic mechanisms of ultrasonic vibration-assisted laser surface texturing on Ti-6Al-4V: microstructural evolution and tribological enhancement
Coupling biomimetic micro-textures with MoS2 solid lubricant to enhance tribological properties of Ti6Al4V
Effect of different silicone oils on the tribological and rheological properties of nano-silica-based grease at high temperatures
Study on the evolution of fretting and sliding worn surface under dry friction condition

Suggested Reading

Mechanism of friction of fullerenes
Industrial Lubrication and Tribology (August,2002)
The effect of hexagonal boron nitride additive on the effectiveness of grease‐based lubrication of a steel surface
Industrial Lubrication and Tribology (March,2012)
Sliding wear behaviour of a cast iron as affected by test environment and applied load
Industrial Lubrication and Tribology (May,2009)
Experimental study of the effect of additive on the tribological properties journal bearing under running‐in and start‐up or shut‐down stages
Industrial Lubrication and Tribology (May,2008)
Tribological characteristics at running‐in of repaired tractor engines using friction modifiers
Industrial Lubrication and Tribology (June,2009)

Related Chapters

DEVELOPMENT OF HAND-HELD RHEOLOGY TOOL AND SUITABLE TESTING CRITERIA
Cement Combinations for Durable Concrete: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 5–7 July 2005
THE INFLUENCE OF TEMPERATURE ON THE FLUIDITY OF FRESH SELF COMPACTING CONCRETE
Admixtures - Enhancing Concrete Performance: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 6 July 2005
Rheology of bitumens
The Shell Bitumen Handbook, 6th edition

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
CrossRef (11)
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal