Skip to Main Content
Article navigation
Volume 47, Issue 5
1 October 1995
Industrial Lubrication and Tribology Cover Image for Volume 47, Issue 5
Technical Paper| October 01 1995

DRA contribution to research beyond the field of research Available to Purchase

Channan Matharuh;
Channan Matharuh
Defence Research Establishment, Pyestock
Search for other works by this author on:
This Site
PubMed
Google Scholar
L. Rudd
L. Rudd
Defence Research Establishment, Pyestock
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 1758-5775
Print ISSN: 0036-8792
© MCB UP Limited
1995
Industrial Lubrication and Tribology (1995) 47 (5): 5–7.
https://doi.org/10.1108/00368799510097899

Details the friction and wear testing facilities offered to civilian customers by the DRA and lists recent projects. Cylinder and ball on plate fuel lubricity and fire resistant hydraulic fluid tests are described with line drawings and the results obtained tabulated.

Keywords:
Fire resistant fluids, Friction, Fuels, Lubricity, Tests, Wear
This content is only available via PDF.
© MCB UP Limited
1995
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
112 Views
View Metrics
Synergistic mechanisms of ultrasonic vibration-assisted laser surface texturing on Ti-6Al-4V: microstructural evolution and tribological enhancement
Coupling biomimetic micro-textures with MoS2 solid lubricant to enhance tribological properties of Ti6Al4V
Effect of different silicone oils on the tribological and rheological properties of nano-silica-based grease at high temperatures
Study on the evolution of fretting and sliding worn surface under dry friction condition

Suggested Reading

Tribological performance of low blend decanter cake biodiesel
Industrial Lubrication and Tribology (May,2017)
Diesel engine failures due to combustion disturbances, caused by fuel with insufficient lubricity
Industrial Lubrication and Tribology (April,2003)
The influence of MoS2 on the mechanism of piston‐ring wear during the running‐in process
Industrial Lubrication and Tribology (December,1999)
Effect of boronizing on the structural, mechanical and tribological properties of CoCrW dental alloy produced by selective laser melting
Industrial Lubrication and Tribology (December,2018)
Development of novel additives for slide way lubricants
Industrial Lubrication and Tribology (March,2015)

Related Chapters

EXPERIMENTAL STUDY OF THE WEAR OF A CONCRETE SURFACE UNDER ICE FRICTION
Challenges of Concrete Construction: Volume 3, Repair, Rejuvenation and Enhancement of Concrete: Proceedings of the International Seminar held at the University of Dundee, Scotland, UK on 5–6 September 2002
DIRECT SHEAR FAILURE DESIGN BASED ON THE SHEAR-FRICTION FAILURE MODEL AND THE PLASTIC SHEAR ENVELOPE
Application of Codes, Design and Regulations: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 5–7 July 2005
COMPARISON OF RESISTANCE TO ABRASION OF FAST TRACK CONCRETE AT VARIOUS AGES
Role of Concrete In Sustainable Development: Proceedings of the International Symposium dedicated to Professor Surendra Shah, Northwestern University, USA held on 3–4 September 2003 at the University of Dundee, Scotland, UK

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal