Skip to Main Content
Article navigation
Volume 5, Issue 6
1 June 1953
This article was originally published in
Scientific Lubrication
Scientific Lubrication Cover Image for Volume 5, Issue 6
Review Article| June 01 1953

EMULSIONS AND STRAIGHT CUTTING FLUIDS

A.E. LAWSON;
A.E. LAWSON
Search for other works by this author on:
This Site
PubMed
Google Scholar
E.G. ELLIS
E.G. ELLIS
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2977-7224
Print ISSN: 0371-0947
© MCB UP Limited
1953
Scientific Lubrication (1953) 5 (6): 22–24.
https://doi.org/10.1108/eb052236

ALTHOUGH in general the use of an emulsion or a straight cutting oil will be conditioned by either the material to be machined, the particular tool, or the requirement of the operation itself, it would yet be correct to say that, broadly speaking, these two physically very different fluids will do the same work.

This content is only available via PDF.
© MCB UP Limited
1953
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
98 Views
1 Crossref
View Metrics
Simulation and experimental verification of vibration signals for bearing faults in the framework of digital twin
Exfoliation of MoS2 nanosheets via reaction–diffusion framework for enhanced boundary lubrication performance in crude Jatropha oil
Tribological properties and mechanisms of three kinds of hard thin films for semiconductor shear pin
Tribological improvement of magnesium alloy using solid lubricant with cerium oxide catalysis under heating treatment conditions

Suggested Reading

Resonance failure sensitivity analysis of straight-tapered assembled pipes conveying nonuniform axial fluid by active learning Kriging method
Multidiscipline Modeling in Materials and Structures (July,2019)
The viscometric examination of cement pastes with interrupted helical impellers
Advances in Cement Research (April,1988)
Analysis and simulation of straight-through labyrinth seal in hydrostatic support system
Industrial Lubrication and Tribology (July,2019)
Services as emulation marketing: conceptualization and concerns
Journal of Services Marketing (December,2023)
Waviness and straightness of cylinder and textured piston ring tribo pair
International Journal of Structural Integrity (April,2015)

Related Chapters

CHAPTER IV. THE BUCKLING TENDENCY IN STRAIGHT PIPES UNDER UNIFORM FLUID PRESSURE.
CALCULATIONS IN HYDRAULIC ENGINEERING: A PRACTICAL TEXT-BOOK FOR THE USE OF STUDENTS, DRAUGHTSMEN, AND ENGINEERS WITH NUMEROUS ILLUSTRATIONS AND EXAMPLES. PART I. FLUID PRESSURE, AND THE CALCULATION OF ITS EFFECTS IN ENGINEERING STRUCTURES
Emerging Novelty through Imitation? Discovering Emulation in Processes of Creating Alikeness
The Generation, Recognition and Legitimation of Novelty
The Bending of History Made Straight
(Re)Imagining Elementary Social Studies: A Controversial Issues Reader

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
CrossRef (1)
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal