In this paper, experiments were carried out to study the friction and wear performance for the materials of the piston and cylinder in a water hydraulic axial piston pump. The matching of a 940 stainless steel circle with a F102 engineering plastics block and a 940 stainless steel circle with an Al2O3 ceramic block were also studied. The wearing capacities were calculated by theoretical formulae based on the grinding crack widths. When pure water is used as hydraulic transmission medium, it is better to use ceramic with engineering plastics as matching materials for the piston and cylinder of water hydraulic axial piston pump. The experimental results have provided a theoretical basis for selecting the matching materials of the piston and cylinder.
Article navigation
1 February 2003
Conceptual Paper|
February 01 2003
Research on materials of piston and cylinder of water hydraulic pump
Yang Huayong;
Yang Huayong
State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, Peoples Republic of China
Search for other works by this author on:
Yang Jian;
Yang Jian
State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, Peoples Republic of China
Search for other works by this author on:
Zhou Hua
Zhou Hua
State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, Peoples Republic of China
Search for other works by this author on:
Publisher: Emerald Publishing
Online ISSN: 1758-5775
Print ISSN: 0036-8792
© MCB UP Limited
2003
Industrial Lubrication and Tribology (2003) 55 (1): 38–43.
Citation
Huayong Y, Jian Y, Hua Z (2003), "Research on materials of piston and cylinder of water hydraulic pump". Industrial Lubrication and Tribology, Vol. 55 No. 1 pp. 38–43, doi: https://doi.org/10.1108/00368790310457124
Download citation file:
Sign in
Don't already have an account? Register
ICE Member Sign In
Log inPurchased this content as a guest? Enter your email address to restore access.
Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve.
Suggested Reading
Experiments on effects of dust particles on the wear of cylinder liner in internal combustion engine
Industrial Lubrication and Tribology (September,2012)
Wear testing for industry
Industrial Lubrication and Tribology (August,1999)
New ultra-compact pneumatic cylinders designed for long life
Industrial Robot (December,1998)
Piston ring-cylinder liner tribology investigation in mixed lubrication regime: part I-correlation with bench experiment
Industrial Lubrication and Tribology (September,2015)
Power clamping cylinders now available in metric sizes
Aircraft Engineering and Aerospace Technology: An International Journal (June,1998)
Related Chapters
COMPARISON OF RESISTANCE TO ABRASION OF FAST TRACK CONCRETE AT VARIOUS AGES
Role of Concrete In Sustainable Development: Proceedings of the International Symposium dedicated to Professor Surendra Shah, Northwestern University, USA held on 3–4 September 2003 at the University of Dundee, Scotland, UK
EXPERIMENTAL STUDY OF THE WEAR OF A CONCRETE SURFACE UNDER ICE FRICTION
Challenges of Concrete Construction: Volume 3, Repair, Rejuvenation and Enhancement of Concrete: Proceedings of the International Seminar held at the University of Dundee, Scotland, UK on 5–6 September 2002
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
