This paper aims to introduce the moment of inertia of the driving and driven end of the clutch into the analysis of the transient temperature field of a friction plate and studied the influencing factors on that, especially to a marine gearbox.
A three-dimensional transient heat transfer analysis model of a wet clutch friction plate used in a marine gearbox is developed, and the transient characteristics of the temperature field during engagement are analyzed with taking account of the influence factors such as the sliding friction coefficient, engaging revolving speed, moment of inertia and applied engagement pressure.
The paper found out that the hot spot appears on the surface of the friction plate, taking account of the effect of radial slots and spiral groove. To avoid damage to the friction plate as a result of overheating, the appropriate sliding friction coefficient, lower engaging revolving speed and reasonable selection of applied engagement pressure curve can ensure a favorable heating situation of the friction plate. The reasonable structural design for the clutch with a bigger moment of inertia of driving end and smaller moment of inertia of driven end can reduce the engaging time effectively and decrease the peak temperature of the friction plate.
This paper fulfils a method to study the transient temperature field of a wet clutch friction plate, especially used in a marine gearbox.
