Open figure viewer
Purpose
This study aims to investigate the friction coefficient of Al2O3–NbC nanocomposite obtained by spark plasma sintering sliding against a steel ball.
Design/methodology/approach
Tribological tests were carried out using a reciprocating nanotribometer in a ball on flat configuration with normal loads in the range from 10 to 100 mN under dry conditions. Surface changes were analyzed by confocal microscopy and 3D profilometry.
Findings
The values of the friction coefficient varied from 0.15 to 0.6 and are independent of the applied load.
Originality/value
The tribological behavior is attributed to fracture in the contact region and the effect of wear debris.
Peer review
The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2019-0356/
© Emerald Publishing Limited
2020
Emerald Publishing Limited
Licensed re-use rights only
You do not currently have access to this content.
