The cleaning of food production equipment using cleaning detergents may contaminate the lubricant of the bearings, thereby reducing the bearing service life. The purpose of this paper is to investigate the cause and mechanism of such damage of bearings lubricated by cleaning detergent/water-in-oil emulsions.
The emulsion was prepared by adding a mixture of cleaning detergent and water in one base oil. A self-designed ball-on-disc optical interference test rig was applied to examine the effect of emulsion on lubrication and wear of bearing contacts under pure sliding conditions.
The emulsion reduced lubricating film thickness at a relatively low-sliding speed but only when the water concentration (20%) in emulsion was high. Water droplets were trapped around the ball-on-disc contact area under static conditions because of a high capillary force. The emulsion can induce damages on the soft surface in the startup mainly due to the presence of water around the contact.
The basic lubrication behaviour of water/oil emulsions containing cleaning detergent under pure sliding was experimental studied and the mechanism of bearing damage in food production equipment was investigated. Based on the study, the solution to avoid such damage was proposed.
