This study aims to investigate the causes of leakage in radial oil seals under dynamic eccentricity, elucidate the influence of operating parameters on leakage failure and develop methods for predicting and preventing such leakage.
Based on the principle of cam motion and considering viscoelasticity, develops a motion model of the compression and release of the shaft seal and proposes a method to determine its failure. In addition, this study quantifies the leakage gap and formulates a quantitative calculation model to accurately determine the location and shape parameters of the leakage gap.
Leakage gaps predominantly occur during the release phase of the shaft seal. Their presence can be identified by comparing the descending times of the seal and the shaft during this phase. An increase in rotation speed and eccentricity heightens the likelihood of gap formation, with both the dimensions and leakage rate of the gap increasing as these factors escalate. Eccentricity, in particular, has a more pronounced effect on gap formation.
This study clarifies the failure mechanisms of radial oil seals under dynamic eccentricity and introduces a criterion for identifying leakage gaps, providing valuable theoretical guidance for the design and optimization of radial oil seals.
The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0192/.
