... in water promotes hydration layer structuring, enhancing lubrication and interfacial stability. Tribological properties PTFE Abrasive wear Mixed abrasives environment Tribochemical transformation National Natural Science Foundation of China U23B2098 National natural science...

... Publishing Limited 2025 Emerald Publishing Group Ltd Licensed re-use rights only Agro-waste Filler Particle reinforced composites Polymer composites Abrasive wear Taguchi experimental design Recently, fabrication of fiber and filler reinforced polymer composites has been significantly...

... Emerald Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only Wear energy Ceramic coating Abrasive wear Tribo oxide Carbide Thermally sprayed WC-based coatings exhibit excellent resistance to wear, high-temperature and corrosion. High velocity oxy fuel (HVOF...

...@subu.edu.tr 03 05 2024 25 08 2024 29 09 2024 © Emerald Publishing Limited 2024 Emerald Publishing Limited Licensed re-use rights only 16MnCr5 Abrasive wear Carburizing process Surface roughness Carburizing layer thickness In today’s rapidly changing world, one...

... Zhang can be contacted at: zhangyimin@zqu.edu.cn Figure 5 Ultrasonic washed worn surfaces of the rollers-1 and rollers-2 © Emerald Publishing Limited 2024 Emerald Publishing Limited Licensed re-use rights only Abrasive wear Ceramics Roller bearing Dynamic properties...

...-being or dental health in daily use. Therefore, this study aims to investigate the tribological parameters between tooth, toothpaste and toothbrush laboratory tests with a focus on abrasive wear. Design/methodology/approach The real-world system was systematically transferred to a laboratory scale...

... and F_N were identified as the momentous effect (p < 0.01) on wear volume ΔV. T (≥50 °C) had positive correlation with f and ΔV, and both V_rel and F_N correlated negatively with f. The dominant abrasive wear...

... was confirmed using EDS technique attached with HRSEM instrument. Friction Wear rate Abrasive wear Al₂O₃ Alumina Hardness Adhesive wear Adhesion strength CVD diamond coatings Wear-scar According to present literature, it is commonly accepted that diamond is a “low...

... apparatus used to conduct abrasive wear test. The wear process parameters are optimized for minimum wear based on L27 Taguchi orthogonal design. The Taguchi technique using design of experiments (DOE) is used to obtain the data. The ANOVA and an orthogonal array are used to examine the influence of wear...

... alloy as matrix and TiC as reinforcement by self-propagating high-temperature synthesis technique. The abrasive wear behavior of RZ5 Mg alloy matrix reinforced with TiC particulates has also been examined. The pin-on-disc apparatus has been used for the tests. The abrasive paper is used as a counter...

... on the bearing roller elements Figure 4 Damage failures on the inner race of the bearing 17 10 2016 28 11 2016 01 01 2017 22 01 2017 © Emerald Publishing Limited 2018 Emerald Publishing Limited Licensed re-use rights only Bearings Abrasive wear Marine...

..., ZDDP reduced the wear of DLC film and prevented the oxidation of base oil during tribotests. Originality/value This is the first work on the tribological properties of ta-C DLC lubricated with corn oil with and without anti-wear additives. Abrasive wear Antioxidant Additive Anti-wear additive...

... Emerald Publishing Limited 2017 Emerald Publishing Limited Licensed re-use rights only Surface finish Tool Stainless steel Abrasive wear Cold rolling Carbides Cutlery AISI 420 stainless steel has a vast application in the cutlery industry, particularly in the production of knives...

... oxide could increase the melting degree of powder and decrease porosity of AT coatings. Friction Coating Abrasive wear Binary rare earth oxide Plasma spray National Basic Research Program of China 2015CB057501 Gai Zhao can be contacted at: zhaogai1987@163.com 18 05 2016...

...Ferit Ficici Purpose The paper aims to describe the Taguchi design method-based abrasive wear modeling of in situ AlB2 flake reinforced Al-4Cu matrix alloy composites. Design/methodology/approach The abrasive wear behaviors of the composite samples were investigated using pin-on-disk method...

.... Test specimens had been cleaned ultrasonically with n-hexane for 5 minutes and then dried after the tests for microscopic and spectroscopic examinations. Lubricant additives Abrasive wear SEM/EDX analysis Surface analysis ZDDP free NP3 = non phosphorus R1 = Phosphorus...

...Bill Wilson © MCB UP Limited 1999 --> Abrasive wear Erosion Testing Industrial consultation meeting on abrasion, wear and erosion testing Keywords Abrasive wear, Erosion, Testing The DTI (Government Department of Trade and Industry) plans to continue supporting...