... roughness = 0.02 μm) were fixed. The three-dimensional profiles and wear volume loss were obtained using MICROXAM-three-dimensional surface profiler. The detailed explanation about the experiment was revealed in the supplied information. Coatings Graphene Friction Composite materials...

... re-use rights only Resins Wear Friction Composite materials Waste Regression analysis Ministry of Higher Education Malaysia ERGS/2013/FKM/TK01/UTEM/02/04/E00016 Several studies have been conducted to reduce wear and friction by investigating different types of composite...

..., which is larger than 500 μm, on the tribological performances of laser surface-textured PKAC-E composite. 25 05 2016 13 08 2016 07 09 2016 © Emerald Publishing Limited 2017 Emerald Publishing Limited Licensed re-use rights only Wear Friction Composite materials Surface...

...Mehmet Bagci; Huseyin Imrek Purpose – This study aims to examine solid particle erosion behavior of novel hybrid composite materials where borax (B₂O₃) particles (∼150 μm) were added to glass fabric and epoxy resin at an amount of 15 and 30 per cent. Design/methodology...

... made to clarify the technical viability of TKP as a potential filler for G-E composite. © Emerald Group Publishing Limited 2015 Optimization techniques Tribology Composite materials The advent of advanced materials to combat wear situations has resulted in the emergence of polymer...

... previous investigations. Akin Akinci can be contacted at: akinci@sakarya.edu.tr © Emerald Group Publishing Limited 2015 Polymers Tribology Wear Friction Composite materials Additives Polycarbonate (PC) is an amorphous engineering thermoplastic which combines good thermal...

... capability and thus a slow decrease in μ is observed. © Emerald Group Publishing Limited 2014 Friction Wear resistance Composite materials Brakes are one of the most important safety and performance components in automobiles. Most of the brake linings used in vehicle are based...

... carbide particles (SiCp) reinforcement in aluminium alloys improved the wear properties of several cast and wrought aluminium alloys (Zhang and Alpas, 1997 ; Alpas and Zhang, 1992 ; Sannino and Rack, 1995). Genetic algorithm Aluminium Composite materials Response surface method AlSi10Mg/SiCp...

... Emerald Group Publishing Limited 2013 Polymers Composite materials Tribology Friction Wear Lubrication At present, polyurethane (PU) is one of the most rapidly developing branches in technology of polymers. Properties of PU can be modified in the desirable direction by changing...

... of the manufacturing technologies and variation of shape, dimension, and percentage of reinforcement material. Alloys Wear resistance Composite materials Metal matrix composites Stir casting Taguchi's techniques Orthogonal array Analysis of variance Wear behaviour © Emerald Group Publishing...

..., the wear rates decreased with increasing particle size. Mechanical properties of materials Composite materials Metals Wear resistance Hybrid metal matrix composites Alumina Graphite Stir casting © Emerald Group Publishing Limited 2012 N. Radhika can be contacted at: rcn_kongu...

.... It was found that artificial neural network can be successfully used for prediction of mass loss of composites. © Emerald Group Publishing Limited 2012 Composite materials Neural nets Metals Wear Artificial neural network Back propagation Aluminium matrix composites Mass loss Hybrid...

... for society and also the automobile industries, especially in the making of brake drums. Wear Composite materials Friction Ageing (materials) Metal matrix composites have many potential applications because of the unique property combinations that can be achieved (Modi et al., 1992...

... with special dimensional structure. Wang Shi‐bo can be contacted at: wangshb@cumt.edu.cn © Emerald Group Publishing Limited 2012 Composite materials Wear Physical properties of materials Friction Polyamides PA1010 Traction Wear testing Rolling friction The low traction force...

... in accordance with Anderson (1992) . Figure 2 presents the variation of coefficient of friction with sliding distance for aluminum and its composites materials tested under 40 N load and 1.0 ms⁻¹ sliding speed. The coefficient of friction for of un‐reinforced aluminum and aluminum composites...

...Dewan Muhammad Nuruzzaman; Mohammad Asaduzzaman Chowdhury; Mohammad Lutfar Rahaman Purpose The present paper seeks to report the effect of duration of rubbing on friction coefficient for different polymer and composite materials. Variations of friction coefficient and wear rate with the normal...

... particulates, depending on the temperature at which the particulates are introduced in the melt. In liquid metallurgy process, the particulates are added above the liquidus temperature of the molten alloy (Serdar Osman and Buytoz, 2007). Composite materials Alloys Friction Wear Lloyd (1994...

... multi‐pass abrasive wear performance of thermoplastic material, and online wear measurement to substantiate clogging behavior is unique in the present multi‐pass abrasive investigation. © Emerald Group Publishing Limited 2010 Thermoplastic polymers Composite materials Wear Friction...

... is studied. The microstructural and mechanical properties of composite material samples are determined by differential scanning calorimeter, XRD, microhardness, optical and scanning electron microscopy tests. Originality/value SiO₂ particles distributed in the matrix are effective to improve...

... Emerald Group Publishing Limited 2010 Tribology Composite materials Fillers Since the establishment of the concept of macro‐molecules by H. Staudinger, the development of polymer materials has changed all our lives. However, the performance of pure polymers is not suitable under some...