...Aparecido Carlos Gonçalves; Linilson Rodrigues Padovese Purpose The purpose of this paper is to provide information on lubricant contamination by biodiesel using vibration and neural network. Design/methodology/approach The possible contamination of lubricants is verified by analyzing...

... and polar contaminants in oil. Design/methodology/approach Color‐change detecting device was developed using light‐emitting diodes, optic fibers and photodiodes of three‐color‐sensing elements. Color ratio (CR) and total contamination parameters based on transmitted light intensity in red, green...

...M.M. Maru; R. Serrato‐Castillo; L.R. Padovese Purpose This work aims to compare the vibration behavior of roller and ball bearings operating with clean and quartz‐contaminated lubricants. Wear influence on vibration of both bearing types was also compared. Design/methodology/approach...

... © MCB UP Limited 2002 --> Contamination Monitoring Cambridge Consultants Limited and Pall Corporation develop in-line particulate contamination monitor Keywords: Contamination, Monitoring A low cost particulate contamination monitor (Plate 3) to measure fluid...

... through purifying equipment at a low velocity. © MCB UP Limited 2001 Emulsions Electromagnetics Contamination Control Emulsion is usually used as a lubricant on the 20‐roller Sendzimir cold rolling mill at Silicon Steel Strip Plant, Wuhan Iron & Steel Co. During the process...

... provide the same key benefits: complete removal of solid/liquid impurities from gas samples; removal of solids and gas bubbles from liquid samples; all the cartridges contain an environmentally-friendly, non-contaminating disposable filter element; and all minimise pressure drop. Matthew Lampton...

...Sven Berg The wear of a machine element, whether it is due to fatigue or abrasive wear, will add contaminants in the form of particulates to the system. If a machine element is starting to wear out it will produce a large amount of particles and it will finally break down. Since this can be very...