... of 54.75 % and 48.72 %, followed by the sintering temperature, contributing 43.44 % and 46.22 % in determining corrosion current density and wear rate, respectively. A minimum wear rate of 14.50 × 10–6 g/m, corresponding to a 54.40 % improvement compared to bare Ti64, is achieved for Ti64-0.8 Wt.% MLG...

... and the extrusion injection molding method were used to prepare 16 polyether ether ketone ( PEEK ) composites and the hardness, tensile strength and compressive strength were evaluated after determining the strong alkali corrosion process electrochemical corrosion was used to analyze and corrosion resistance...

..., it aims to assess the filter’s effectiveness in improving engine oil properties, reducing wear and corrosion, and enhancing engine longevity. Design/methodology/approach The study investigates the impact of a modified engine oil filter on biodiesel-driven engines. The filter was designed using 3D...

...: the higher the hardness, the higher the coefficient of friction. The addition of zirconia significantly affected the corrosion resistance, which was more positive than the heat treatment effect. Originality/value Post-treatment showed beneficial effects on the wear and corrosion performance of alumina...

... as a result of the fretting cracking of the prostheses components, affecting durability of modular THPs. Fretting corrosion is associated with the decrease in the clinical acceptance of hip modular implants. Design/methodology/approach Starting from the fretting phenomenon influence on modularity...

...Yamid Núñez; Marcio Mafra; Rigoberto E. Morales; Paulo César Borges; Giuseppe Pintaude Purpose This study aims to assess the performance of SAF 2205 duplex stainless steel against pure wear, tribo-corrosion, corrosion and the synergism between wear and corrosion. The effect of plasma nitriding...

...Harun Mindivan Purpose This paper aims to investigate the structural, corrosion and the study of tribocorrosion features of the AA7075 aluminum alloy with and without the application of electroless Ni-P/Ni-B duplex coating with a thickness of approximately 40 microns. Design/methodology...

...Cagdas Calli; Onur Tazegul; Eyup Sabri Kayali Purpose The purpose of this paper is to investigate the effects of reinforcing particles (B₄C, TiB₂ and TiC) on the physical, corrosion and wear behaviour of copper matrix composite coatings. Design/methodology/approach...

...B. S. Yilbas; Ihsan-ul-Haq Toor; Jahanzaib Malik; F. Patel Purpose – The purpose of the present study is to report the results of the laser treatment of high-strength low-alloy (HSLA) steel surface and corrosion response of the treated surface that was carried out. Metallurgical and morphological...

...Dong Jiang; Litian Hu; Dapeng Feng Purpose The purpose of this paper is to synthesize a novel kind of crown‐type phosphate ionic liquids with better tribological properties for steel/Al system. The anions of crown‐type phosphate ionic liquids contain no F element, which are non‐corrosive to metal...

... is a good candidate to replace the flame bending process. Consequently, laser bending finds application in industry. However, under the corrosive environment care should be taken. Originality/value The work presented is original and has not been published anywhere before. The findings will be useful...

... lubrication, more leakage, and more corrosion. The paper aims to demonstrate the technical feasibility for the water hydraulic vane pump. Design/methodology/approach The material combinations were selected based on related research in literature. The volumetric efficiency and suction performance were...

... on corrosion behaviour and vice versa, has been studied in order to compare the protective properties of the different PVD coatings developed. Findings Cr/CrN PVD coating improves wear in almost a 90 per cent compared to the nitrided substrate, presenting a similar behaviour to this one under extreme...

...T.S.N. Sankara Narayanan; Young Woo Park; Kang Yong Lee Purpose The objective of this paper is to study the effect of a commercial lubricant, which contains a 50‐50 mixture of zinc diamyldithiocarbamate and petroleum oil, on the fretting corrosion of tin‐plated copper alloy contacts. Design...

...A.A. Boudi; M.S.J. Hashmi; B.S. Yilbas Purpose This paper seeks to examine the fatigue properties of HVOF sprayed Inconel‐625 coating of steel substrate before and after the aqueous corrosion. Design/methodology/approach Workpieces were cut from steel sheets. After chemical and ultrasonic...

...Jian‐Qiang Hu; Xian‐Yong Wei; Zhi‐Min Zong Purpose Pure 2,5‐dimercapto‐1,3,4‐thiadiazole (DMTD) disulfide dimer (DMS2) shows excellent four ball weld properties, however, the product is a solid material with relatively low initial seizure load and exhibits certain corrosion, which accelerate...

... © Emerald Group Publishing Limited 2006 --> Lubricants Corrosion Corrosion protection Molykote® specialty lubricant family offers corrosion resistance Keywords: Lubricants, Corrosion, Corrosion protection Dow Corning Corporation has announced a line of mineral...

...A. Boudi; M.S.J. Hashmi; B.S. Yilbas Purpose To examine the tensile properties of high velocity oxy‐fuel (HVOF) sprayed Inconel 625 coating of steel substrate before and after the aqueous corrosion. Design/methodology/approach Workpieces were cut from steel sheets. After chemical...

... © MCB UP Limited 2002 --> Corrosion Coatings New check-list for control of corrosion Keywords: Corrosion, Coatings Corrosion can cause problems that not only affect a company's profitability but also have a negative impact on the environment and can affect safety...

... © MCB UP Limited 2002 --> Bearings Wear Corrosion Coatings Keywords: Bearings, Wear, Corrosion, Coatings In all types of environments from deep space to offshore, where precision bearing systems are challenged by harsh operating conditions such as marginal...