...Saima Yaqoob; Jaharah A. Ghani; Nabil Jouini; Shalina Sheik Muhamad; Che Hassan Che Haron; Afifah Juri Purpose This study aims to investigate the machining performance of CVD-coated carbide tools by considering most crucial machinability aspects: cutting force, tool life, surface roughness...

... As the BX additive ratio in the cutting fluid used in the MQL system increased, the cutting force values decreased. The lowest cutting force value was measured in the tests with cutting fluid containing 1.5% BX. In addition, a smoother surface was obtained by adding 1.5% BX to the cutting fluid. Furthermore...

... electron microscopy, and the influence mechanism of milling parameters on surface quality is expounded. Findings The results show that the cutting force increases by 133% with the increase in milling depth. The measured minimum surface roughness is 0.035 µm. With the change in milling depth...

...Jiafeng Lu; Xiaolin Deng; Jing Tang; Xiaoyun Chen Purpose When processing 11Cr-3Co-3W martensitic heat-resistant steel, the traditional pouring cooling method often appears large cutting force, high cutting temperature, serious tool wear and poor surface quality. This paper aims to use new cooling...

...Emel Kuram; Babur Ozcelik; Bilgin Tolga Simsek; Erhan Demirbas Purpose The purpose of this paper is to investigate the performances of vegetable based cutting fluids by comparing tool life, surface roughness and cutting force during end milling of AISI 304 stainless steel. In the experiments...