...Shijie Fu; Jian Gong; Shanyi Wang; Tianyu Zhao Purpose Extreme vibration environmental poses significant challenges to the fatigue life of aircraft cables. This study aims to propose a novel method to investigate the fretting wear life of aircraft cable under random vibration. Design...

...Wenlong Li; Po Zhang; Zhiwen Yue; Wei Duan; Yun Cai; Zhaobing Cai; Le Gu Purpose This paper aims to investigate the effect of laser energy density on the fretting wear properties of TC4 alloys prepared by selective laser melting to enhance their service life. Design/methodology/approach...

... et al., 2012). Therefore, a thorough investigation into the fretting wear of TC4 is imperative to advance fretting tribology theory and enhance wear detection within the aerospace domain. Figure 1 The tongue and groove junction of the blade/wheel (Fouvry et al., 2009...

...Yulei Yang; Jimin Xu; Yi Liang Purpose Quantitative fretting wear prediction is of practical significance for industrial components. This study aims to establish a fretting wear model considering the formation of tribolayers and provide better fretting wear prediction. Design/methodology...

... and of the femoral stems’ trunnions can influence the fretting wear of the taper junction. Design/methodology/approach It was analysed whether a microgrooved taper surface of the femoral stem trunnion improves the fixation and reduces the wear rate at the taper junction of the hip prosthesis. Two models have...

...-use rights only Steel Fretting wear 35CrMoA steel Fretting fatigue Elliptical loading path Axial cyclic stress Fretting fatigue is due to the simultaneous existence of fretting and fatigue loads. The contact parts of the two components accelerate failure (Pape and Neu, 2007 ; Madge...

...Xiaocui Xin; Yunxia Wang; Zhaojie Meng; Fengyuan Yan Purpose The purpose of this paper is to investigate the fretting wear performance of ultra-high-molecular-weight-polyethene (UHMWPE) with addition of GO and SiO₂. Design/methodology/approach In this study, GO were synthesized...

...Xiaocui Xin; Yunxia Wang; Zhaojie Meng; Hao Liu; Yunfeng Yan; Fengyuan Yan Purpose This paper aims to focus on studying the addition of nano-tungsten disulfide (WS₂) on fretting wear performance of ultra-high-molecular-weight-polyethylene (UHMWPE). Design/methodology/approach...

...Kai Guo; Zhongli Han; Yipeng Wang; Yang Wang; Wei Tan Purpose The purpose of this study is to reveal the interaction behavior between tubes and supports in steam generators and study the fretting wear of tubes in different load conditions. Design/methodology/approach The fretting wear tests...

...Teng Xiao; Daosheng Wen; Shouren Wang; Mingyuan Zhang; Beibei Kong; Qiqi Yu Purpose This paper aims to investigate the fretting wear mechanism of an Al-Li alloy at room temperature, the tangential fretting wear tests were carried out. Design/methodology/approach The effects of displacement...

...Guanghong Wang; Guangwei He; Shengguan Qu; Hao Li; Mushun Zhou; Husheng Zhang Purpose Fretting wear exists widely in the field of matching mechanical parts whereas previous research studies mostly focus on the point contact through a ball-plate tribometer. This paper aims to study the influence...

... to prevent tribological systems against fretting wear. Design/methodology/approach The scientific methodology reads as follows: market research to select appropriate additives according to the purpose of the R&D project; screening tests to determine the technical performance of the additives...

...Yasar Sevik; Ertugrul Durak Purpose Fretting wear takes place when two contacting solid surfaces are subjected to relatively small amplitude oscillatory motion in the order of a few microns. The purpose of this paper is the design and manufacture of a fretting wear test rig that can analyze...

...Channan Singh Matharu The paper describes the evaluation of the fretting wear performance of diesel fuel additives as opposed to the sliding wear performance which is normally evaluated, and in fact forms part of the diesel fuel specification. Variations in load, frequency and running time were...