... to the Si₃N₄ matrix, and the dry friction and wear behaviors of Si₃N₄-based composite against TC4 disc were performed at the different loads by using pin-on-disc tester. Findings The friction coefficients and wear rates of SN-2L composite against TC4 were significantly lower than...

... of this study is that its tribological performance could be tested and analyzed so as to use it in different fields. Design/methodology/approach The friction resistance of a-Ta under dry friction conditions was tested at different roads. The relationships between load and friction coefficient, wear rate...

... properties of CF-Al₂O₃/Cu composites were investigated on an electrical damage test system at different loads and currents. Findings As the load increases, the wear mechanism of the composite changes from abrasive wear to delamination wear. As the current increases, the oxidation...

... the tribological behavior and mechanism of the A359–SiCp/Fe composites at different temperatures (100–500 °C) and loads (7 N, 10 N and 12 N). Design/methodology/approach The A359–SiCp/Fe composite was fabricated by vacuum-assisted infiltration. The dry sliding tribological behaviors of A359–SiCp/Fe composite...

...Rongrong Li; Yanguo Yin; Kaiyuan Zhang; Ruhong Song; Qi Chen Purpose This paper aims to investigate how ball milling (BM) and load influence transfer film on counterbody and the correlation between transfer film and tribological properties of copper-based composites. Design/methodology/approach...

...Zhishuang Wang; Songhua Li; Jian Sun; Junhai Wang; Yonghua Wang; Zhongxian Xia; Chao Wei Purpose The purpose of this study is to investigate the effects of load and rotation speed on dry sliding of silicon nitride, including a series of tribological behaviors (friction coefficient, wear rate...

...Jiaqi Pan; Xiaoshan Liu; Guoqiu He; Bin Ge; Peiwen Le; Jingquan Li; Zhiqiang Zhou Purpose The purpose of this paper is to understand the effect of particle content, applied load and sliding speed on the tribological properties of A356-SiCP composites manufactured using a newly developed vacuum...

...Fangfang Zhang; Fengyun Yan; Tijun Chen; Xiaohong Li; Zhen Wang Purpose This paper aims to study the effect of load on the tribological behaviour of Cu-based composites, so as to obtain a suitable applied load on these composites. Design/methodology/approach Cu-based composites were prepared...

...Mengjiao Wang; Yunxia Wang; Hao Liu; Fengyuan Yan Purpose This paper aims to study the influence of load and environment medium on the fretting behavior of SAF 2507 SDSS. Design/methodology/approach In this study, the effect of load on the fretting behavior of SAF 2507 SDSS in air and sea...

...Dong Qiang Gao; Rui Wang; Wei Chen Purpose The effect of the load on the tribological properties of Si₃N₄-hBN sliding against Si₃N₄ were investigated under dry and water lubrication condition. Design/methodology/approach Using a MMU-5G type pin...