... satyaprasad.sv@gmail.com 13 11 2025 18 02 2026 18 03 2026 15 06 2026 © 2026 Emerald Publishing Limited 2026 Emerald Publishing Limited Licensed re-use rights only Heat treatment Hot pressing Aluminium nanocomposites Mechanical properties Tribological properties...

... by vacuum freeze-drying. Mechanical properties Tribological properties Nanocomposites PI/EP–DFNS National Key Research and Development Program 2024YFB3410205 National Key Research and Development Program of China 2024YFB3410205; 2022 Liaoning Province Applied Basic Research Program...

...Feilong Jia; Qiang Miao; Wenping Liang; Shu Wang; Xiaoma Tao Purpose The low surface hardness and wear resistance of TA15 alloy limit their applications. The purpose of this study is to enhance the surface mechanical properties of TA15 alloy via carbide coating protection, while guaranteeing...

...), coupling agent KH570 (Nanjing Chuangshi Chemical Co., Ltd, China), acetone, anhydrous ethanol, deionized water and Concentrated nitric acid were all used during the test. PEEK composites Solid lubricants Mechanical properties Wear mechanisms Corrosion Alloys possess a high melting point...

... history for this article is available at: https://publons.com/publon/10.1108/ILT-11-2024-0413/ © Emerald Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only Laser cladding AlCoCrFeNiCu high-entropy alloy Microstructure Mechanical properties Corrosion resistance...

... of different woods under water lubrication was thoroughly analyzed, in conjunction with the characterization and testing of mechanical properties, micromorphology and chemical composition. Findings The findings reveal that the mechanical properties and inclusions of wood are the primary factors affecting...

... The oil absorption and discharge tests were conducted to evaluate the oil content properties of the materials, while the mechanical properties were analyzed through cross-sectional morphology examination. Investigation into the tribological behavior and wear mechanisms encompassed characterization...

... the effects of nanofiller selection, composite structure design and material modification on the tribological and mechanical properties of PI-matrix composites. Design/methodology/approach The preparation technology of PI and its composites is introduced and the effects of carbon nanotubes (CNTs), carbon...

... of the stuffing of high-hardness VC particles. Hence, it is concluded from this study that S1 sample, i.e. AA8090/VC, could be a better candidate for aerospace applications as it showed good tribological and mechanical properties. Originality/value To the best of the authors’ knowledge, this work is original...

...Samet Aksoy; Fikret Kabakcı; Mustafa Acarer; Hayrettin Düzcükoğlu; Erdem Ünüvar; Fehim Fındık Purpose Paper aims to an alloy development study was carried out to increase the mechanical properties of cylinder heads. Design/methodology/approach AlSi12 alloys are used to manufacture...

... and coefficient of friction (COF) were analyzed for different wear parameters. Further, the mechanical properties like hardness and tensile strength were investigated. Findings Results showed that the inclusion of reinforcement particles improved the wear and mechanical properties of AA5083 alloy (C0). The C2...

.... Totally, four different types of composites were prepared, namely, AA/3Al, AA/1BC-2Al, AA/2BC-1Al and AA/3BC. Wear behavior and mechanical properties of the composites were analyzed by conducting wear test, microhardness test, tensile test and morphological analysis. Findings Results showed...

... humidity and water conditions. The mechanical properties of fiber-reinforced polymer composites tend to decrease as the rate of humidity increases while the wear rates of fiber-reinforced polymer composites show somewhat mixed behavior. Particulate fillers like metals and advanced ceramics reinforced...

...) dissimilar joints were prepared from AA6061 and AA5083 aluminum alloys, and the weld nugget (WN) was reinforced with hard reinforcement particles such as La₂O₃ and CeO₂. The tribological and mechanical properties of the prepared materials were tested to analyze...

... Limited 2020 Emerald Publishing Limited Licensed re-use rights only Additives Reinforcement Wear Mechanical properties Polypropylene Polypropylene (PP), a plastic material, has a wide variety of technical applications thanks to its adjustable material properties. However...

...Mohamad Nordin Mohamad Norani; Mohd Fadzli Bin Abdollah; Muhammad Ilman Hakimi Chua Abdullah; Hilmi Amiruddin; Faiz Redza Ramli; Noreffendy Tamaldin Purpose This study aims is to investigate the correlation between tribological and mechanical properties of the fused filament fabrication 3D-printed...

...Ruzhong Yan; Liaoyuan Wang; Shengze Wang Purpose The purpose of this paper is to study the mechanical properties of aerostatic guideway taking the structural deformation into account, and further improve the calculation method of guideway. Design/methodology/approach A theoretical model...

... property. So, its comprehensive tribological and mechanical properties are better than those of monolayer material. Originality/value The friction and wear properties of a new type bilayer materials were investigated. And their tribological mechanisms were proposed. This work can provide a theoretical...

... by the combination of elasticity and viscosity (Myshkin and Kovalev, 2009 ; Myshkin and Petrokovets, 2004). The mechanical properties of polymers can be greatly affected by blending with other polymers and by filling with materials of different origin (metals, ceramics and polymers) in the form of fibers or powders...