... on challenging materials. Design/methodology/approach The extensive literature review is carried through the existing literature, which shows the effect of various process parameters in the milling operation of challenging materials under NF-MQL conditions. The manuscript also deals with identifying...

... 23 12 2021 © Emerald Publishing Limited 2022 Emerald Publishing Limited Licensed re-use rights only PI porous oil-bearing material Orthogonal experimental method Process parameters Tensile properties Tribological property prediction With the rapid development...

... was guaranteed. The average roughness (Ra) of the surface was reduced to 6.7 nm under the following process parameters: abrasive content of 2 weight per cent, oxidizer content of 2 weight per cent, slurry flow rate of 100 ml/min and polishing time of 20 min. Originality/value – To meet the final process...

... amount and the Ra were 124 and 7.61 nm with appropriate values of the process parameters of the oxidizer, oxidizer content, abrasive content, slurry flow rate and polishing time which were H₂O₂, 2 wt.%, 1 wt.%, 10 ml/min, 5 min, respectively. Originality/value – Based on SEM...