... be vertically adjusted using a screw jack. Figure 2 Systematic sketch of slurry pot tester © Emerald Publishing Limited 2024 Emerald Publishing Limited Licensed re-use rights only Computational fluid dynamics (CFD) Stainless steel Erosion wear Fly ash Optimization Discrete phase...

...Na Fan; Liqiang Chai; Peng Wang; Jun Liang Purpose This paper aims to study the tribocorrosion behavior of 304 stainless steel (SS) sliding against SiC and Si₃N₄ counterparts in artificial seawater. Design/methodology/approach The tribocorrosion behavior of 304SS sliding...

... to deposit the Ni-based coatings [Ni-Cr-O and NiCrBSiFe-WC(Co)] on the surface of stainless steel (SS 316L) substrate. A Ducom TR-41 erosion tester was used to conduct the tribological experiments on bare/HVOF coated SS 316L. The erosion wear experiments were carried out for different time durations (1.30...

... an alternative surface finishing technique (electrochemical pickling) to be used after annealing of stainless steel. Second, the work clearly shows the presence of protruding surface carbides when conventional surface finishing techniques are used, which do not exist after acid pickling. Practical...

...Mieczysław Kaczorowski; Radosław Winiczenko Purpose The results of a study of friction welding of ductile cast iron using stainless steel interlayer are presented. Based on the microstructure evolution at the region close to the ductile cast iron‐stainless steel interface, the phenomena...

...Hakan Aydin; Ali Bayram; Şükrü Topçu Purpose The purpose of this paper is to present the results of a study on friction characteristics of plasma, salt‐bath and gas nitrided layers produced in AISI 304 type austenitic and AISI 420 type martensitic stainless steels. Design/methodology/approach...

...Richard P. Daisley; Boppana V. Chowdary Purpose The purpose of this paper is to investigate the effects of liquid carbon dioxide (LCO₂) on grinding of stainless steel. Design/methodology/approach A factorial experimental approach was used to compare the LCO₂'s performance...

...Ugur Caligulu; Mustafa Taskin; Haluk Kejanli; Ayhan Orhan Purpose The purpose of this paper is to investigate interface characterization of CO₂ laser welded AISI 304 austenitic stainless steel and AISI 1010 low carbon steel couple. Laser welding experiments were carried under argon...

...Mumin Sahin Purpose The purpose of this paper is to investigate mechanical and metallurgical variations at interfaces of commercial austenitic‐stainless steel and copper materials welded by friction welding. Design/methodology/approach In this paper, austenitic‐stainless commercial steel...

...K.A. Abou‐El‐Hossein Purpose The purpose of this paper is to investigate the efficiency of cutting fluids when end milling AISI 304 stainless steels. Design/methodology/approach Two groups of cutting tests were conducted, one with the application of a coolant (wet machining) and the other...