... in inconsistent contact patterns. Consequently, tooth surface modification is an essential measure for improving the service performance of face gears. Design/methodology/approach Based on the theory of face gear pair modification, a differential corrective design is proposed for the gear pairs in a torque...

... and Interface Science , Vol. 580 , pp . 730 - 739 , doi: 10.1016/j.jcis.2020.07.033 . Chuang , W. , Geng-Sheng , J. , Lei , P. , Bao-Lin , Z. , Ke-Zhi , L. and Jun-Long , W. (2018), “ Influences of surface modification of nano-silica by silane coupling agents on the thermal...

...Lingrui Cai; Ziyi Li; Sang Xiong Purpose Surface modification of MoS₂ was carried out to improve its tribological properties. This paper aims to reveal that by precisely controlling the modifier type and addition amount, a significant reduction in the friction coefficient and enhanced...

... Limited Licensed re-use rights only Tribology Surface modification Eco-friendly lubricant Super olein Ministry of Higher Education of Malaysia for the Konsortium Kecemerlangan Penyelidikan 2021 Research 4L961 Universiti Teknologi Malaysia (UTM) for the UTM Fundamental Research 22H46...

... 12 2022 28 02 2023 18 03 2023 © Emerald Publishing Limited 2023 Emerald Publishing Limited Licensed re-use rights only DBDP-assisted ball milling TiO₂ Core-shell structure Surface modification Molecular dynamics Tribological characteristic m = mass...

... increased. ZIF-8 Surface modification Lubricating additives Tribological properties According to statistics, about 80% of the damage of mechanical equipment parts is caused by friction and wear (Minami, 2017). In modern industry, reducing friction and wear plays a significant role...

.... Furthermore, a counter body surface with collected wear debris has been analyzed. Originality/value Almost the industries are now focused on a new surface modification technique, which improves the surface and tribological characteristics. This research work specifically relates the tribological effect...

... for modifying metal oxide to improve the dispersibility of nanoparticles. Design/methodology/approach SA-TiO2 nanoparticles were synthesized using an in-situ esterification method followed by surface modification with stearic acid. The microstructure of the nanoparticles was characterized by scanning...

... Limited Licensed re-use rights only Surface modification Sliding wear Electron beam surface melting Istanbul Technical University MDK-2017-41241 One of the most commonly applied processes used to enhance the performance of metallic surfaces is hardfacing mainly by Fe-, Ni...

... Publishing Limited 2018 Emerald Publishing Limited Licensed re-use rights only Nanotribology Wear behavior Surface modification Hardfacing For wear-resistant applications, Co-base alloys have been enjoying widespread use over 100 years primarily due to their high strength, ability...

... of these components by new bulk material is not a practical approach (Gupta and Sharma , 2011a, 2011b). Surface engineering techniques allow desired surface modifications by various techniques such as carburizing, cyaniding, nitriding, coatings/claddings, electroplating, etc. (Bensely et al, 2005 ; Pang...

...Binnur Sagbas Purpose The aim of this study is to determine the effect of argon plasma surface modification on tribological properties of conventional ultra-high molecular weight polyethylene (UHMWPE) and vitamin E-blended UHMWPE. In previous studies, some researchers conducted a study on argon...

... the surface of NBR to increase the tribological performance. © Emerald Group Publishing Limited 2016 Wear resistance Surface modification Ar plasma NBR Among different types of polymers, elastomers, also called rubbers, are of special interest for many industrial applications in the past...