... a l   V a l u e − P r e d i c t e d   V a l u e ) 2 N e t   V a r i a n c e Wind turbine blades Polyurethane-coated GFRP ANN Taguchi method CSA–GWO Permutation importance score Wear mechanism Despite the many benefits of wind power...

.../methodology/approach In this study, the oil film strength of trimethylolpropane trioleate (TMPTO)-based lubricating oil was evaluated using a four-ball tribometer. To study the impact of multiple factors, the Taguchi L27 orthogonal array was used with four control factors at three levels. The Taguchi method...

... characteristics. Then, the effects of inner ring speed, radial load, grease filling volume and other factors on the friction coefficient of rolling bearing are analyzed using the Taguchi method. Findings The results indicate that the ranking of various factors affecting the friction coefficient is: radial...

... experimental design (DOE) test method is widely used in academic and industrial fields to determine the most effective parameters based on the data obtained (Akincio˘glu et al., 2017). The experimental design is realized by Taguchi method, and the parameters affecting the test results are analyzed...

... Specific wear rate EDS TMPTO Taguchi method Vegetable oil is the better choice for the base oil due to its long fatty acid chain. Shafi et al. (2021) studied an impact of different fatty acids on thermophysical and tribological properties of bio-based lubricants. Plant oils...

..., 120, 150 and 180 min, respectively. To enhance erosion wear resistance of both piping materials, high-velocity-oxy-fuel coating technique is used to deposit WC-10Co4Cr coating. The parametric influence of erosion wear is optimized using Taguchi method. Findings The results show that significant...

... on block-on-disc tribometer at three different loads (10, 20 and 30 N) and three different sliding speeds (0.25, 0.5 and 1 m/s), at the sliding distance of 900 m, in dry sliding wear conditions. Optimization of the tribological behavior was conducted via the Taguchi method, and ANOVA was used...