Assessment of meta-schist as a novel sustainable resource for Portland cement manufacturing

In this study, the use of meta-schist as an alternative to sand–clay in preparing cement raw mixtures was investigated for the first time. To produce the highest quality Portland cement clinker by examining the mineral and chemical properties of meta-schists, two different raw meal samples were prepared, utilising conventional cement clay as a baseline sample ((PC)Ref) and the other with meta-schist ((PC)MSC). The effects of both raw mixtures on burnability tests and reactivity were evaluated based on the unreacted lime content in samples after they had been sintered at 1200, 1300, 1350, 1400 and 1450°C. The porosity amount, distribution, grain structure of silicate phase crystals, and equivalent crystal diameters and amounts of meta-schist clinker phases (C₃S, C₂S, C₃A and C₄AF) examined by polarising optical microscope showed that they are suitable for the production of PC. The hydration products of the cement mortars were determined by scanning electron microscopy and energy-dispersive X-ray analysis at 2, 7 and 28 days. In addition, the compressive strength test results of (PC)MSC and (PC)Ref mortars after 28 days of curing ranged between 57 and 55.5 MPa, and the cement produced was classified as CEM I 42.5R.