Skip to Main Content
Article navigation

Using oyster shell powder (OSP) to prepare magnesium phosphate cement (MPC) not only reduces the pollution caused by the wasted oyster shell disposal, but also benefits the development of more environmentally friendly cement. The effect of OSP on the hydration and strength development of MPC was studied. An axial compression experiment including 45 cuboid specimens was executed to investigate the compressive strength, failure mode, stress–strain relationship, and energy absorption of MPC mixing with different mass contents (0% to 12%) of OSP over the curing times of 7, 14, and 28 days. Scanning electron microscopy, X-ray diffraction and energy dispersive spectroscopy were utilized for measuring the variation of MPC microstructure and hydration products caused by OSP. Results indicated that a new reactant CaHPO4·2H2O was formed, which optimized matrix strength. The substitution of OSP could reduce the cost of MPC by 2–9% without decreasing the strength. Compared with MPC without OSP, the compressive strength of the specimen with 3% OSP is increased by 6%. However, with the continuous increase of OSP, the compressive strength gradually decreases. Similarly, the elastic modulus of MPC increases first and then decreases with the increase of OSP.

You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$39.00
Rental

or Create an Account

Close Modal
Close Modal