Strength characteristics of cement slurry in high geothermal tunnel environment

The early-age strength of grouting material is crucial for tunnel support under high geothermal temperatures. Grouting materials (such as the most commonly used cement slurry) hydrate and solidify under the condition of variable-temperature curing after entering the real stratum. However, the development process of the early strength of cement paste under the condition of variable-temperature curing is still unclear. This aim of this study was to elucidate the environmental effects of high-ground-temperature tunnels on the early strength development of cement stone. Cement slurry was subjected to variable-temperature curing under three different temperatures (T = 40°C, 60°C and 80°C) and two different relative humidities (H = 5% and 95%) through design experiments. Compressive strength tests were conducted, along with microscopic analysis using X-ray diffraction, scanning electron microscopy and nuclear magnetic resonance. The results indicate that the strength of cement stone under variable-temperature curing was lower than that under constant-temperature curing at the same temperature. The influence of variable-temperature curing conditions on the strength variation of samples with a high water/cement ratio at later age was greater for curing at 80°C. The research results are helpful to understand the influence of environmental effects of high-ground-temperature tunnels on the properties of grouting materials.