Reliability analysis of residual service life of restored concrete bridge Available to Purchase

The Wan Jiang Bridge in China was damaged by ship impact and subsequently restored. This paper presents a detailed evaluation of the residual service life (RSL) of the bridge using the reliability analysis method of the Joint Committee on Structural Safety, based on the structural load-bearing capacity (LBC) of the bridge and the design load. Data were collected from bridge design codes, field loading tests and finite-element (FE) analysis. The LBC was initially calculated and subsequently revised using specific coefficients. Using FE analysis, the bending moment on the control section of the bridge was determined under the most unfavourable loading conditions and the ultimate LBC of the bridge was checked. Subsequently, static and dynamic loading tests on the restored bridge were conducted, with the load and capacity determined for the control section based on FE analysis. The loads considered were dead load, vehicle load and crowd load. A time-dependent reliability index was developed for the restored bridge using the probability distributions of capacity and design load variables, and the RSL was determined. This case study, predicting the RSL of the bridge based on a multitude of data, should be valuable for future bridge maintenance and management.