Sulfate erosion is one of the important factors causing the decline of concrete durability, and it is also one of the most environmentally damaging and most influential types of environmental erosion. In view of the problem that the durability of fibre-reinforced concrete decreased due to sulfate attack, according to the natural environmental conditions in western China, the rapid corrosion test of fibre (layered hybrid) concrete was carried out using the test method of accelerated erosion in saturated solution immersion. The loss of strength, mass and relative dynamic elastic modulus was studied as the law of durability degradation. A reliability analysis method for the residual life of sulfate-resistant concrete based on Wiener distribution is proposed. The dynamic elastic modulus was selected as the key degradation indicator to establish the fibre concrete reliability model and for life prediction. The results show that the layered hybrid fibre-reinforced concrete has stronger erosion resistance. Among the reliability evaluation parameters, the relative dynamic elastic modulus is more sensitive than the mass loss. The Wiener distribution process can effectively describe the degradation law of fibre concrete performance. Based on the experimental data, the residual life reliability model established by this method can directly reflect the relationship between the reliability of the test piece and the corrosion time and can reflect the remaining life of the test piece.
Article navigation
22 December 2020
Research Article|
October 05 2020
Sulfate attack resistance and reliability analysis of fibre-reinforced concrete materials
Feifei Zhu;
Feifei Zhu
Key Laboratory of Disaster Prevention and Mitigation in Civil Engineering of Gansu Province, Lanzhou University of Technology, Lanzhou, China
Search for other works by this author on:
Hongxia Qiao;
Engineering Research Center of the Western Ministry of Education for Civil Engineering of Disaster Prevention and Disaster Reduction, Lanzhou University of Technology, Lanzhou, China
(corresponding author: qhxlut7706@163.com)
Search for other works by this author on:
Jiangchuan Li
Jiangchuan Li
Key Laboratory of Disaster Prevention and Mitigation in Civil Engineering of Gansu Province, Lanzhou University of Technology, Lanzhou, China
Search for other works by this author on:
(corresponding author: qhxlut7706@163.com)
Publisher: Emerald Publishing
Received:
May 02 2020
Accepted:
September 21 2020
Online ISSN: 2046-0155
Print ISSN: 2046-0147
ICE Publishing: All rights reserved
2020
Emerging Materials Research (2020) 9 (4): 1121–1130.
Article history
Received:
May 02 2020
Accepted:
September 21 2020
Citation
Zhu F, Qiao H, Li J (2020), "Sulfate attack resistance and reliability analysis of fibre-reinforced concrete materials". Emerging Materials Research, Vol. 9 No. 4 pp. 1121–1130, doi: https://doi.org/10.1680/jemmr.20.00110
Download citation file:
New and popular articles
Suggested Reading
Reliability analysis of fiber concrete freeze–thaw damage based on the Weibull method
Emerging Materials Research (January,2020)
Reliability analysis of freeze–thaw damage of fiber concrete based on Miner theory
Emerging Materials Research (June,2019)
Preparation of two novel Schiff base polymers and their Eu (III)/Yb (III) complexes
Emerging Materials Research (January,2019)
Water transport in foam concrete: visualisation and numerical modelling
Magazine of Concrete Research (March,2019)
Modeling of multi‐layer circuit boards by using a model of bi‐phase and elasto‐plastic plies
Circuit World (August,2007)
Related Chapters
Design of elements in steel–concrete sandwich composite materials
Blast Effects on Buildings
Introduction
Thermal Insulation Materials for Building Applications: The complete guide
Types of thermal insulation materials
Thermal Insulation Materials for Building Applications: The complete guide
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
