Radiation has been one of the most important phenomena since its discovery, and it has been used in different fields. Due to its hazardous effects, it should be shielded, and thus, new alternative materials should be developed. In this study, the radiological parameters of two types of composite materials were calculated at gamma ray energies of 10−3–105 MeV. These gamma-ray-shielding parameters are the mass attenuation coefficient, linear attenuation coefficient, mean free path, half-value layer, tenth-value layer, atomic cross-section, electronic cross-section, effective atomic number (Z eff), effective electron density (N eff), effective conductivity (C eff), equivalent atomic number (Z eq) and exposure buildup factor of the two different composites. The calculations were done using the Phy-X/PSD software.
Article navigation
30 September 2022
Research Article|
June 30 2022
Gamma-ray-shielding parameters of carbon–aramid epoxy composites
Mustafa Ucar;
Mustafa Ucar
Faculty of Science and Arts, Department of Chemistry, Afyon Kocatepe University, Afyonkarahisar, Turkey
Search for other works by this author on:
Hüseyin Fırat Kayıran;
Department of Agriculture and Rural Development, Mersin, Turkey
(corresponding author: huseyinfiratkayiran@gmail.com)
Search for other works by this author on:
Abdul Vahap Korkmaz
Abdul Vahap Korkmaz
Afyon Kocatepe University, Afyonkarahisar, Turkey
Search for other works by this author on:
(corresponding author: huseyinfiratkayiran@gmail.com)
Publisher: Emerald Publishing
Received:
April 25 2022
Accepted:
June 06 2022
Online ISSN: 2046-0155
Print ISSN: 2046-0147
ICE Publishing: All rights reserved
2022
Emerging Materials Research (2022) 11 (3): 338–344.
Article history
Received:
April 25 2022
Accepted:
June 06 2022
Citation
Ucar M, Kayıran HF, Korkmaz AV (2022), "Gamma-ray-shielding parameters of carbon–aramid epoxy composites". Emerging Materials Research, Vol. 11 No. 3 pp. 338–344, doi: https://doi.org/10.1680/jemmr.22.00072
Download citation file:
New and popular articles
Suggested Reading
Modification of surface and interface of copper indium gallium selenide thin films with sulfurization
Emerging Materials Research (June,2022)
Out-of-plane stability of fixed concrete-filled steel tubular arches under uniformly distributed loads
Magazine of Concrete Research (March,2020)
A drift capacity prediction model for retrofitted reinforced concrete columns
Magazine of Concrete Research (May,2020)
Water transport in foam concrete: visualisation and numerical modelling
Magazine of Concrete Research (March,2019)
Reliability analysis of fiber concrete freeze–thaw damage based on the Weibull method
Emerging Materials Research (January,2020)
Related Chapters
Measurement and modelling of conduction in carbon fibre-cement composites
ICE Themes Smart Concrete
Introduction
Thermal Insulation Materials for Building Applications: The complete guide
Types of thermal insulation materials
Thermal Insulation Materials for Building Applications: The complete guide
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
