... conflicts of interest pertaining to the research, authorship, and publication of this article. 23 09 2025 02 04 2026 © 2026 Emerald Publishing Limited 2026 Emerald Publishing Limited Licensed re-use rights only abaca bio-composites biodegradable polymers composite materials...

... activity composite materials extraction freeze-milling limonene material processing material structure mechanical properties mosquito repellency supercritical CO₂ sustainable materials Hubei Integrative Technology and Innovation Center for Advanced Fibrous Materials...

...) 22 07 2025 16 02 2026 © 2026 Emerald Publishing Limited 2026 Emerald Publishing Limited Licensed re-use rights only composite materials insulators mechanical properties mechanical properties: polymers thermal insulation UN SDG 13: Climate action waste reduction...

... the scattering coefficient, and R represents the reflectivity. 07 09 2025 08 11 2025 © 2025 Emerald Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only composite materials material processing material structure mechanical properties sustainable...

... Publishing Limited Licensed re-use rights only bending stiffness composite materials multi-scale structure through-thickness reinforcement National Natural Science Foundation of China 52405428 52205501 Natural Science Foundation of Jiangsu Province BK20220597 High-end...

... (voguru1@gmail.com) Conflict of interest The authors declare that they have no conflict of interest. 09 05 2025 27 10 2025 © 2025 Emerald Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only carbon fiber composite materials hybrid...

... a hemispherical top of 16 mm dia. and 12.9 kg mass in the Instron Dynatup 9250HV impact device, as shown in Figure 1(b) . During the impact process, the contact force and displacement history of the impactor with an incident energy of 25 J are recorded. composite materials failure mechanism GFRP T-joint...

... . © 2025 Emerald Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only adhesive composite materials dynamic properties environmental impact glass-fiber mechanical properties PET recycling The authors declare that no funds, grants, or other supports were...

... 2025 Emerald Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only annealing coatings composite coating composite materials corrosion corrosion test residual stress sustainable materials wear test In the modern world, the piston-ring-liner (PRL...

... of composite T-joints under three-point bending, a three-dimensional finite-element model of a T-joint made from glass fiber-reinforced composite material was constructed. The results reveal that cracks initiate in the triangular region and gradually propagate, ultimately leading to complete debonding failure...

... reserved 2025 autoclave composite materials curing mechanical properties Seven laminating plates were fabricated 130 × 250 mm in dimension with different cure pressures, heating rates, and cure times with the autoclave process to investigate the effect of void content, interlaminar...

... However, note that pretreating the fibers and epoxy resin (denoted prepregs) and adding additives to enhance the interfacial adhesion is time consuming and increases the cost. 25 , 27–31 Thermal annealing and posttreatment of composite materials also demonstrated increase of mechanical properties...

... models in achieving desired properties for SMPCs and the potential challenges and opportunities presented by these components to extend their usage in advanced applications are presented. composite materials future prospects polymers reinforcements remote sensing shape memory polymer...

.... Composite materials containing 62.5% glass fiber and 20% PP demonstrated remarkable performance for manufacturing sleepers. The addition of 62.5% glass fiber in composite materials containing PP enhanced the flexural strength, flexural modulus, tensile strength and compressive strength by 315, 623, 296...

... the limitations typically associated with using EPS geofoam blocks. The research also provides a comprehensive assessment of the effectiveness of the newly developed composite material. Table 1 Engineering properties of fly ash Property Value Specific gravity, G_s 2.073...

..._{− x}O₃ (PLT)–(Ba_{1−3 x}Nd_{2 x})₄Co₂Fe₃₆O₆₀ (BNCFO) (where x = 0.25) composite materials T1–T3 sintered at various temperatures (1100, 1200 and 1300°C, respectively). An X-ray diffraction...

... ICE Publishing: All rights reserved 2023 composite materials electromagnetic absorption kenaf magnetite material properties mechanical nanocomposites tribological M₁ original weight of the sample M₂ final weight of the sample after...

... process is shown in Figure 1 . (corresponding author: yqma@chd.edu.cn) 17 05 2022 01 09 2022 ICE Publishing: All rights reserved 2022 composite materials electron microscopy fiber-reinforcement graphite materials properties A axial compression area...

..., the radiological parameters of two types of composite materials were calculated at gamma ray energies of 10⁻³–10⁵ MeV. These gamma-ray-shielding parameters are the mass attenuation coefficient, linear attenuation coefficient, mean free path, half-value layer, tenth-value layer, atomic cross...

... the complicated interface behavior of CIGS solar cells and benefit the improvement of the devices. (corresponding author: pkuhjf@bit.edu.cn) 19 12 2021 06 06 2022 ICE Publishing: All rights reserved 2022 composite materials electron microscopy materials technology...