... of the wall element: (a) linear distribution; (b) average value boxplot Emerald Publishing Limited: All rights reserved 2023 cold metal transfer design electron microscopy Inconel 625 mechanical properties microstructure wire arc additive manufacturing E Young’s modulus...

... electron microscopy fiber-reinforcement graphite materials properties A axial compression area of the specimen a length of the compressed section of the specimen b width of the specimen E bending modulus E_post...

... was observed by scanning electron microscopy. X-ray diffraction (XRD), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) were used to study the phases, structures and chemical components of the thin films. After sulfurization, the grain size became larger and a sulfur-contained phase could be found...

... on the surface of rGO, and its composition was confirmed by EDS. UV-DRS showed slight blueshift of the rGO–zinc oxide NH absorption spectrum, suggesting the successful anchoring of zinc oxide on the rGO surface. The scanning electron microscopy images revealed sheetlike morphology with 20–25 nm thick zinc oxide...

... of scanning electron microscopy, as well as elemental analysis by way of energy-dispersive X-ray analysis, were carried out. Additionally, the mechanical and thermal insulating behaviors of these materials were examined through bending and shear strength tests, in accordance with the three-point method...

... experiments were carried out with a tube electric furnace. In addition, the two- and three-dimensional morphologies of sulfide inclusions in the steel along with elemental concentrations were detected by scanning electron microscopy and optical microscopy. Results show that tellurium enhanced the sizes...

... was found to be monotonic in nature. (corresponding author: shamanth053@gmail.com) 10 07 2019 03 10 2019 ICE Publishing: All rights reserved 2019 electron microscopy intermetallics material characterisation a and c lattice constants...

... is mainly composed of silica, which constitutes 91% of the total mass. This silica is seen as quartz in the XRD diagram of RHA. The scanning electron microscopy (SEM) micrographs of RHA are shown in Figure 2 . It can be seen that the RHA particles have an irregular shape. The chemical compositions...

... was characterized with scanning and transmission electron microscopy. Electron energy loss spectroscopy, electron diffraction and Fourier transform analysis were performed to determine crystal spacings and chemical composition of both materials. MgB₂ nanowires especially, because of their superconducting...