... © 2026 Emerald Publishing Limited 2026 Emerald Publishing Limited Licensed re-use rights only abrasion treatment chemical treatment compressive strength concrete properties environmental impact recycled coarse aggregates sustainable construction UN SDG 11: Sustainable cities...

... environmental standards. The European Union requires 85% of each vehicle to be reused or recycled, and Japan targets 88%, aiming for 95% recovery in the future. These initiatives have led manufacturers to assess the full environmental impact of materials, from raw material extraction through disposal. 1...

... of the functional layer, the membrane flux decreased by only about 12.5% during the 120 min TC solution filtration process. The high selectivity and antifouling properties of the composite membrane make it an ideal choice for antibiotic desalination. environmental impact process development National...

... environmental impact glass-fiber mechanical properties PET recycling The authors declare that no funds, grants, or other supports were received during the preparation of this manuscript. A area E′ storage modulus E′′ loss modulus I moment...

...-ray shielding capabilities, with the SMHP binder opportunities avenues for further performance enhancement. 05 05 2024 31 01 2025 Emerald Publishing Limited: All rights reserved 2025 environmental impact material characterization radiation μ linear...

.... (corresponding author: xuebing2011@jlu.edu.cn) 02 12 2022 04 03 2024 Emerald Publishing Limited: All rights reserved 2024 decanoic acid environmental impact expanded dickite phase change materials sustainable materials F_c crystallinity ratio...

...: All rights reserved 2021 environmental impact material characterisation natural materials (corresponding author: yangguang@eurasia.edu) 26 09 2020 20 05 2021 Because of the excellent properties of concrete it has been widely applied in housing construction, water...

... environmental impact heat transfer A area of enclosure (m^{2) h convective heat-transfer coefficient ((W/m2)/°C) I current (A) K thermal heat-transfer coefficient (W/K) k thermal conductivity of insulation ((W/m)/°C}...

... of 22 ± 1°C and humidity of 80 ± 5%. As the sample preparation step was successfully completed, chemical, mineralogical, physical and microstructural analyses of samples were carefully conducted, and the results are given in the following discussion. environmental impact green chemistry...

... SCC containing steel and PP fibers. Improvements of 15% in compressive strength and 53% in flexural strength were obtained. environmental impact materials science mechanical properties E_dyn dynamic elastic modulus f_c compressive strength...

... 02 2021 ICE Publishing: All rights reserved 2021 composite materials environmental impact sustainable materials E₅₀ static stiffness m_i initial mass of the soil specimen q_u unconfined compressive...

...Yen-Men Lu, PhD; Yung-Piao Chiu, PhD; Yan-Chyuan Shiau, PhD Rammed earth has been used as a building material in China for thousands of years. However, due to weather and environmental impacts, monuments built from rammed earth suffer from varying degrees of damage. To restore these structures...

... reserved 2015 Energy Environmental impact Transport Figure 2. Experimental setup The valves are opened in such a way that it permits only the atmospheric air to enter in its natural condition into the intake manifold. The engine was tested at no load condition and various load...

... composites environmental impact hybrid materials and structures mechanical properties sustainable technology Aspects of environmental protection and recycling are becoming more and more important in our society and are the driving forces for development, especially in the area of aviation as well...